Skoda Amundsen Operating Instructions Manual page 43

By connecting the device to the device the function of the connected device is
limited (e.g. no coupling of the telephone is possible). In this case, the device
has the message The mobile device is restricted.
The connected device cannot be used as a USB source for media playback or
viewing images.
Disconnection
›
In the main menu  press the function key  .
or
›
Disconnect the device from the USB input.
Main menu

Read and observe on page 39 first.
After connecting the device to the device a list of certified applications and the
following menu is displayed depending on the context
Disconnection

End running applications

Displays the screen contents of the connected device (while an application

is running)
Settings of the function MirrorLink

List of certified applications
A
Other pages with applications (by running your finger sideways across the
B
screen or by turning the dial, the next page can be displayed )
Start the application
›
In the main menu  select the desired application.
If there is only one available application it will be started automatically after
connecting.
40
MirrorLink
Fig. 24
MirrorLink: Main menu
» Fig. 24.
™
Managing the application

Read and observe on page 39 first.
After launching the application, the following function keys are displayed
» Fig. 25.
- Using the menu 
A
Return to main menu 

Keyboard display

Masking the function keys

Displays the function keys right / bottom

- Using the connected device, as well as the running application
B
Depending on the type of the connected device, as well as the running appli-
cation, various function keys can be displayed (at the most three at the same
time).
Display hidden function keys
›
If the icon can be seen in the device screen when the function keys are mut-
ed  then press the controller  .
Display of the running application
›
In the list of applications, press the function key 
Ending the application
›
Press the function key  →  .
By pressing the function key Close all, all running applications are closed.
Fig. 25
Example of a running application
» Fig. 24 on page 40 .