Sending A Message - Panasonic KX-TG7301FX Operating Instructions Manual

TG7301-7321FX(e).book Page 33 Wednesday, March 26, 2008 5:19 PM

Sending a message

Writing and sending a new
message
1
K (middle soft key)
2
{V}/{^}: "SMS" i M
3
{V}/{^}: "Create" i M
4
Enter the message (page 45). i
M
5
Enter the destination phone number
(20 digits max.). i M
■ Using the redial list:
Press j repeatedly to select
the phone number. i
M 2 times
■ Using the caller list:
{V}/{^}: Select the party. i
M 2 times
■ Using the phonebook:
n i {V}/{^}: Select the
phonebook entry. i M 2 times
6
To save the message, select "Yes".
i M
7
To send the message, press M.
L To cancel sending, press {ih}.
Note:
L This unit supports SMS messages of
up to 612 characters, however, the
maximum number of characters you
can send or receive may be limited by
your SMS service provider/telephone
company. Contact your SMS service
provider/telephone company for
details.
L If your message contains over 160
characters, the message is a long
message and j is displayed. Your
service provider/telephone company
may treat long messages differently
from other messages. Contact your
SMS (Short Message Service)
service provider/telephone company
for details.
L If your phone is connected to a PBX,
store the PBX line access number
(page 35).
Sending a saved message
1
K (middle soft key)
2
{V}/{^}: "SMS" i M
3
{V}/{^}: "Send List" i M
4
To read a saved message, press {V}
or {^} to select the message. i
M
5
To send the message, press K.
i {V}/{^}: "Send" i M
6
Press and hold {C/T} to erase all
numbers.
7
Continue from step 5, "Writing and
sending a new message", page 33.
Editing and sending a saved
message
1
K (middle soft key)
2
{V}/{^}: "SMS" i M
3
{V}/{^}: "Send List" i M
4
{V}/{^}: Select a message. i M
5
K i {V}/{^}: "Edit Message"
i M
6
Continue from step 4, "Writing and
sending a new message", page 33.
33