Panasonic KX-TG7733M Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Telephone
  5. KX-TG7733M
  6. Service manual

Panasonic KX-TG7733M Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Subject : Adding KX-TG7733M to the KX-TG7731 Series.
Note: All other information is the same as KX-TG7731 Service Manual (Order No.
KM41201532CE). You can download and refer the Service Manual on TSN Server.
Please file and use this supplement manual together with the service manual for Model No. KX-TG7731S,
KX-TG7732S, KX-TG7733S, KX-TGA470S, Order No. KM41201532CE.
TABLE OF CONTENTS
1 Exploded View and Replacement Parts List ------------ 2
1.1. Cabinet and Electrical Parts (Base Unit) ------------ 2
1.2. Cabinet and Electrical Parts (Handset) -------------- 3
1.3. Cabinet and Electrical Parts (Charger Unit) -------- 4
1.4. Accessories ------------------------------------------------- 5
1.5. Replacement Parts List ---------------------------------- 6
1.5.1. Base Unit ----------------------------------------------- 6
1.5.2. Handset ------------------------------------------------- 8
1.5.3. Charger Unit ------------------------------------------10
1.5.4. Accessories and Packing Materials -------------10
1.5.5. Screws--------------------------------------------------10
1.5.6. Fixtures and Tools -----------------------------------10
Model No.
Link-to-Cell Cellular Convergence
Solution
M: Metallic Grey Version
(for USA)
PAGE
© Panasonic System Networks Co., Ltd. 2013
Unauthorized copying and distribution is a violation
of law.
ORDER NO. KM41307359SE
Telephone Equipment
KX-TG7733M
KX-TGA470M
F13

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-TG7733M

Summary of Contents for Panasonic KX-TG7733M

  • Page 1 Solution M: Metallic Grey Version (for USA) Subject : Adding KX-TG7733M to the KX-TG7731 Series. Note: All other information is the same as KX-TG7731 Service Manual (Order No. KM41201532CE). You can download and refer the Service Manual on TSN Server.
  • Page 2 KX-TG7733M/KX-TGA470M 1 Exploded View and Replacement Parts List 1.1. Cabinet and Electrical Parts (Base Unit) E1 (*1) PCB1 PCB2 Ref.No. Figure 2.6 x 8mm...
  • Page 3 2 8 mm Put it in the center. Note: (*1) This cable is fixed by welding. (*2) The rechargeable Ni-MH battery HHR-4DPA is available through sales route of Panasonic. (*3) Attach the SPACER (No. 121) to the exact location described above.
  • Page 4 KX-TG7733M/KX-TGA470M 1.3. Cabinet and Electrical Parts (Charger Unit) 200-1 PCB200 200-3 200-2 200-4 Ref.No. Figure φ 2×8 mm...
  • Page 5 KX-TG7733M/KX-TGA470M 1.4. Accessories and Packing Materials 1.4.1. KX-TG7733M A206 A205 A202 P202 P202 A201 P202 (*1) A203, A204 P201 Note: (*1) This pad is a piece of Ref No.P201 (GIFT BOX).
  • Page 6 KX-TG7733M/KX-TGA470M 1.5. Replacement Parts List Safety Ref. Part No. Part Name & Description Remarks 1. RTL (Retention Time Limited) PNHR1584Z GUIDE, JACK PS-HB Note: PQJJ1T039L JACK, MODULAR K2ECYZ000001 JACK, DC The “RTL” marking indicates that its Retention Time is PNKF1228Z1...
  • Page 7 KX-TG7733M/KX-TGA470M Safety Ref. Part No. Part Name & Description Remarks Safety Ref. Part No. Part Name & Description Remarks R123 D0GA102JA021 1k R807 D0GA221JA021 220 R125 D0GA271JA015 270 R891 D0GA221JA021 220 R131 PQ4R18XJ106 R892 D0GA221JA021 220 R133 ERJ3GEYJ154 150k (CAPACITORS)
  • Page 8 KX-TG7733M/KX-TGA470M Safety Ref. Part No. Part Name & Description Remarks Safety Ref. Part No. Part Name & Description Remarks C805 F1G1H3R3A480 3.3p PNJK1149Z KEYBOARD SWITCH C806 F1G1H3R3A480 3.3p PNJT1027Z CHARGE TERMINAL (L) C809 ECUE1H100DCQ 10p PNJT1026Z CHARGE TERMINAL (R) C810...
  • Page 9 KX-TG7733M/KX-TGA470M Safety Ref. Part No. Part Name & Description Remarks Safety Ref. Part No. Part Name & Description Remarks VOL_DW K0H1BB000094 TACTILE SWITCH ECUE1A104KBQ 0.1 VOL_UP K0H1BB000094 TACTILE SWITCH ECUE1H102KBQ 0.001 (RESISTORS) ECUE1A104KBQ 0.1 ERJ2GEJ303 ECUE0J105KBQ 1 D0GA152JA021 1.5k ECUE1A104KBQ 0.1...
  • Page 10 KX-TG7733M/KX-TGA470M 1.5.3. Charger Unit 1.5.3.1. Cabinet and Electrical Parts Safety Ref. Part No. Part Name & Description Remarks PNLC1029ZM CHARGER UNIT ASS'Y without NAME PLATE (RTL) 200-1 PNKM1258Y4 CABINET BODY PS-HB 200-2 PNJT1105Z CHARGE TERMINAL 200-3 PNKF1150Z1 CABINET COVER PS-HB...
  • Page 11 No.KX-TG294SK/KX-TGA470M, Order No. KM41303259SE. TABLE OF CONTENTS PAGE 1 REPLACEMENT PARTS LIST--------------------------------- 2 1.1. REFERENCE CHART------------------------------------ 2 1.2. ORIGINAL AND NEW PARTS COMPARISON LISTS------------------------------------ 2 © Panasonic System Networks Co., Ltd. 2014 Unauthorized copying and distribution is a violation of law.
  • Page 12 KX-TG294SK/KX-TGA470M 1 REPLACEMENT PARTS LIST 1.1. REFERENCE CHART Reason for Change *The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON LISTS. 1. Improve performance Remarks: *m : Discontinued (To be replaced with a new part) 2.
  • Page 13 KX-TG254 1 (TG7731) 4 (TGA470) Up to 6 KX-TGA470* 1 (TGA470) *KX-TGA470 is also an optional accessory, which contains a handset and a charger. © Panasonic System Networks Co., Ltd. 2012 Unauthorized copying and distribution is a violation of law.
  • Page 14 KX-TG254SK/KX-TGA470S WARNING This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians.

  • Page 15: Table Of Contents

    KX-TG254SK/KX-TGA470S TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions----------------------------------------------- 4 15.3. Circuit Board (Handset_Main) ------------------------ 85 1.1. For Service Technicians --------------------------------- 4 15.4. Circuit Board (Charger Unit)--------------------------- 87 2 Warning -------------------------------------------------------------- 4 16 Exploded View and Replacement Parts List ----------- 88 2.1.

  • Page 16: Safety Precautions

    KX-TG254SK/KX-TGA470S 1 Safety Precautions 1.1. For Service Technicians • Repair service shall be provided in accordance with repair technology information such as service manual so as to prevent fires, injury or electric shock, which can be caused by improper repair work. 1.

  • Page 17: About Lead Free Solder (Pbf: Pb Free)

    KX-TG254SK/KX-TGA470S 2.2. About Lead Free Solder (PbF: Pb free) Note: In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that contains lead. We will use PbF solder when discussing the lead free solder used in our manufacturing process which is made from Tin (Sn), Silver (Ag), and Copper (Cu).

  • Page 18: Specifications

    KX-TG254SK/KX-TGA470S 3 Specifications ■ Standard: ■ Bit rate: DECT 6.0 (Digital Enhanced Cordless 1.152Mbit/s (DECT 6.0) Telecommunications 6.0) 1.0 Mbit/s (Bluetooth) Bluetooth wireless technology 2.0 ■ Modulation: ■ Number of channels: GFSK (Gaussian Frequency Shift Keying) 60 Duplex Channels (DECT 6.0) ■...

  • Page 19: Technical Descriptions

    KX-TG254SK/KX-TGA470S 4 Technical Descriptions 4.1. Circuit Configuration of TG773x Series Phones TG773x consists of DECT cordless telephone and Bluetooth Module. Both voices of transmission and reception are transferred by PCM. BBIC on DECT side controls the cordless telephone system, which makes control data communication with BT_IC on BT Module in serial data.

  • Page 20: Dect Description

    KX-TG254SK/KX-TGA470S 4.2. US-DECT Description The frequency range of 1.92 GHz-1.93 GHz is used. Transmitting and receiving carrier between base unit and handset is same frequency. Refer to Frequency Table (P.65). 4.2.1. TDD Frame Format 5 ms 5 ms Up Link ( Handset - > Base Unit ) Down Link ( Base Unit - >...
  • Page 21 KX-TG254SK/KX-TGA470S 4.2.3. Signal Flowchart in the Radio Parts Reception Base unit: A voice signal from TEL line is encoded to digital data and converted into a 1.9GHz modulated radio signal by BBIC(IC501). The RF signal, after which is amplified in BBIC, is fed to selected antenna. Handset: As for a handset RF, RF signal is received in one antenna.

  • Page 22: Block Diagram (Base Unit_Main)

    KX-TG254SK/KX-TGA470S 4.3. Block Diagram (Base Unit_Main)

  • Page 23: Tel Interface Circuit

    KX-TG254SK/KX-TGA470S 4.4. Tel Interface Circuit...

  • Page 24: Block Diagram (Base Unit_Rf Part)

    KX-TG254SK/KX-TGA470S 4.5. Block Diagram (Base Unit_RF Part)

  • Page 25: Circuit Operation (Base Unit)

    KX-TG254SK/KX-TGA470S 4.6. Circuit Operation (Base Unit) General Description: (BBIC, Flash Memory, EERROM) is a digital speech/signal processing system that implements all the functions of speech compression, record and playback, and memory management required in a digital telephone answering machine. The BBIC system is fully controlled by a host processor. The host processor provides activation and control of all that functions as follows.
  • Page 26 KX-TG254SK/KX-TGA470S 4.6.6. Power Supply Circuit/Reset Circuit The power supply voltage from AC adaptor is converted to VBAT (3.0V) in IC302. And +3.0V for peripherals and analog part is insulated from VBAT by Doubler of BBIC. Circuit Operation: VDD4 +5.5V +3.0V VDD3 IC502 IC501...
  • Page 27 KX-TG254SK/KX-TGA470S 4.6.6.1. Charge Circuit The voltage from the AC adaptor is supplied to the charge circuits. +5.5V F301 CHARGE+ C351 CHARGE-...
  • Page 28 KX-TG254SK/KX-TGA470S 4.6.7. Telephone Line Interface Telephone Line Interface Circuit: Function • Bell signal detection • ON/OFF hook and pulse dial circuit • Side tone circuit Bell (RINGING) signal detection and OFF HOOK circuit: In the idle mode, Q141 is open to cut the DC loop current and decrease the ring load. When ring voltage appears at the Tip (T) and Ring (R) leads (When the telephone rings), the AC ring voltage is transferred as follows: L1T→L101→C105→R105→R110→R111→R112→BBIC pin18(RINGING) When the CPU (BBIC) detects a ring signal, Q141 turns on, thus providing an off-hook condition (active DC current flow through...
  • Page 29 KX-TG254SK/KX-TGA470S 4.6.8. Parallel Connection Detect Circuit/Auto Disconnect Circuit Function: In order to disable call waiting and stutter tone functions when using telephones connected in parallel, it is necessary to have a circuit that judges whether a telephone connected in parallel is in use or not. This circuit determines whether the telephone connected in parallel is on hook or off hook by detecting changes in the T/R voltage.
  • Page 30 KX-TG254SK/KX-TGA470S 4.6.9. Calling Line Identification (Caller ID)/Call Waiting Caller ID Function: Caller ID The caller ID is a chargeable ID which the user of a telephone circuit obtains by entering a contract with the telephone company to utilize a caller ID service. For this reason, the operation of this circuit assumes that a caller ID service contract has been entered for the circuit being used.
  • Page 31 KX-TG254SK/KX-TGA470S Call Waiting Caller ID Calling Identity Delivery on Call Waiting (CIDCW) is a CLASS service that allows a customer, while off-hook on an existing call, to receive information about a calling party on a waited call. The transmission of the calling information takes place almost immediately after the customer is alerted to the new call so he/she can use this information to decide whether to take the new call.

  • Page 32: Block Diagram (Handset)

    KX-TG254SK/KX-TGA470S 4.7. Block Diagram (Handset) VBAT ANT1 EEPROM 13.824 MHz VBAT CHG_DET RF part CHG_CTL RXON RSTN RESET TXON CHARGE VBAT BATTERY BBIC Receiver HSSPOUTP Headset Jack LOUT HSMIP 4.0V CN431 VBAT CHARGE HEADSET_DET (KEY) CP_OFF PUMP (BELL) KEY_LED BELL_LED Monitor SP SPOUTP SPOUTN...

  • Page 33: Block Diagram (Handset_Rf Part)

    KX-TG254SK/KX-TGA470S 4.8. Block Diagram (Handset_RF Part) TXON DA801 RXON KX-TGA470 BLOCK DIAGRAM (Handset_RF Part)

  • Page 34: Circuit Operation (Handset)

    KX-TG254SK/KX-TGA470S 4.9. Circuit Operation (Handset) 4.9.1. Outline Handset consists of the following ICs as shown in Block Diagram (Handset) (P.20). • DECT BBIC (Base Band IC): IC1 - All data signals (forming/analyzing ACK or CMD signal) - All interfaces (ex: Key, Detector Circuit, Charge, EEPROM, LCD) •...
  • Page 35 KX-TG254SK/KX-TGA470S 4.9.3. Charge Circuit Circuit Operation: When charging the handset on the Base Unit, the charge current is as follows; DC+(6.5 V) → F301 → R371 → R372 →CHARGE+(Base) → CHARGE+(Handset) → Q4 → D7→ F1 → BATTERY+... Battery... BATTERY- → R45 → GND → CHARGE-(Handset)→ CHARGE-(Base) → GND → DC-(GND) In this way, the BBIC on Handset detects the fact that the battery is charged.

  • Page 36: Circuit Operation (Charger Unit)

    KX-TG254SK/KX-TGA470S 4.10. Circuit Operation (Charger Unit) Charge control is executed at handset side so that the operation when using charger is also controlled by handset. Refer to Circuit Operation (Handset) (P.22) AC Adaptor The route for this is as follows: DC+pin of J1(+) → F1 → R1 → CHARGE+pad → Handset → CHARGE-pad → DC-pin of J1(-).

  • Page 37: Signal Route

    KX-TG254SK/KX-TGA470S 4.11. Signal Route ROUTE SIGNAL ROUTE HANDSET TX HANDSET MIC - R73/74 - C11/13 - RA4 - IC1(22/23) - <HANDSET_RF_TX_ROUTE> - ANT. --- ---ANT. - <BASE_UNIT_RF_RX_ROUTE> - IC501(46/47 - 28) - C184 - Q161 - Q141 - D101 - L101/[L102 - P101] - T/R(TEL LINE) HANDSET RX T/R(TEL LINE) - L101/[P101 - L102] - D101 - Q141 - R165 - R177 - C173 - Q171 - C178 - R178 - IC501(16 - 44/45) - <BASE_UNIT_RF_TX_ROUTE>...
  • Page 38 KX-TG254SK/KX-TGA470S RF part signal route SIGNAL ROUTE ROUTE INTERCOM HANDSET MIC - R73/74 - C11/13 - RA4 - IC1(22/23) - <HANDSET_RF_TX_ROUTE> - ANT. --- HANDSET TO BASE UNIT ANT - <BASE_UNIT_RF_RX_ROUTE> - IC501(2/3 - 41/43) - SPEAKER INTERCOM MIC - C457/C458 - RA452 - IC501(37/38 - 94/95) - <BASE_UNIT_RF_TX_ROUTE> - ANT BASE UNIT --- ANT.

  • Page 39: Location Of Controls And Components

    KX-TG254SK/KX-TGA470S 5 Location of Controls and Components Refer to the Operating Instructions. Note: You can download and refer to the Operating Instructions (Instruction book) on TSN Server. 6 Installation Instructions Refer to the Operating Instructions. Note: You can download and refer to the Operating Instructions (Instruction book) on TSN Server. 7 Operating Instructions Refer to the Operating Instructions.

  • Page 40: Test Mode

    KX-TG254SK/KX-TGA470S 8 Test Mode 8.1. Engineering Mode 8.1.1. Base Unit Important: Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit. Soft keys {FLASH} {FLASH} {CALL WAIT} {CALL WAIT} Naviga tor key/ (Volume) key {OFF} {OFF}...
  • Page 41 KX-TG254SK/KX-TGA470S Set Addr.: 7). Press , a long confirmation beep New Data will be heard. CLEAR 8). Press {OFF} to return to standby mode. Set Addr.: After that, turn the base unit power off and then power on. _ _ _ _ BACK or {>} at "...
  • Page 42 KX-TG254SK/KX-TGA470S 8.1.2. Handset Important: Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit. Soft keys {FLASH} {FLASH} {CALL WAIT} {CALL WAIT} Naviga tor key/ (Volume) key {OFF} {OFF} Dial keypad Dial keypad H/S key operation H/S LCD 1).
  • Page 43 KX-TG254SK/KX-TGA470S Frequently Used Items (Handset) ex.) Items Address Default Data New Data Possible Adjusted Possible Adjusted Remarks Value MAX (hex) Value MIN (hex) Battery Low 00 12/00 13 00 / 00 (*2) Frequency 00 07 / 00 08 00 / 01 00 02 ~ 00 06 Given value Note:...

  • Page 44: Service Mode

    KX-TG254SK/KX-TGA470S 9 Service Mode 9.1. How to Clear User Setting (Handset Only) Handset Press simultaneously until a beep sound is heard. Then single handset is initialized. (The contents of user setting are reset to factory default) *Usage time is not cleared.

  • Page 45: Troubleshooting Guide

    KX-TG254SK/KX-TGA470S 10 Troubleshooting Guide 10.1. Troubleshooting Flowchart FLOW CHART Not working Power ON Base Unit Check Power Not record (*1) Record Check Record Not playback Playback Pre-Message Check Playback Link No link No charge Battery Charge Check Battery Charge Check Link Range Check the RF part No voice...
  • Page 46 KX-TG254SK/KX-TGA470S 10.1.1. Check Power 10.1.1.1. Base Unit Is the AC Adaptor inserted into AC outlet? (*1) AC Adaptor. Is output voltage of AC adaptor 5.5 V? Check Check Power Supply Circuit. Check VDD1(1.8V) :Test point (VDD1) RSTN: Reset = "High"? Check Reset Circuit.
  • Page 47 KX-TG254SK/KX-TGA470S 10.1.2. Check Record 10.1.2.1. Base Unit Not record Incoming Message Check Telephone Line Interface Check Bell signal. [Bell]. Check Telephone Line Interface Does the unit catch line? [OFF HOOK]. Check Line In: Pin 25 of BBIC. Check ICM Recording in Signal Route. Check Auto Disconnect Circuit.
  • Page 48 KX-TG254SK/KX-TGA470S <How to change the Auto Disconnect activation time and VOX level> A) Auto Disconnect activation time: Some Telephone Company lines (fiber or cable) ON Hook and OFF Hook voltages are lower than conventional lines, which may cause a malfunction of Auto Disconnect detection. To solve this problem, try changing the Auto Disconnect activation through the procedures below.
  • Page 49 KX-TG254SK/KX-TGA470S B) Vox level: It makes easier to detect a small voice (caller) by raising the sensitivity of VOX level. Therefore, the recording of TAM is not turned off during a detection. 1) ~ 2) are same as (A). 3) Press "5","1","1". Service ready :5 1 1 CLEAR...
  • Page 50 KX-TG254SK/KX-TGA470S 10.1.3. Check Playback 10.1.3.1. Base Unit Check VDD1(1.8V) :Test point (VDD1) Check Power Supply Circuit. Check output of BBIC (Pin 41,43). Check BBIC and Flash Memory. Check Speaker and its surroundings. Cross Reference: Note: Power Supply Circuit/Reset Circuit (P.14) Flash Memory is IC601.
  • Page 51 KX-TG254SK/KX-TGA470S 10.1.5. Check Link 10.1.5.1. Base Unit Does Base Unit make link with normal working Base Unit is OK. Check Handset. Handset? Is the voltage of VDD3 about 3.0V? Check around Power Supply Circuit. Is the voltage of VDD1 about 1.8V? Does the RF clock (CLK) oscillate at 10.368 MHz in Check around X501 and RF module and adjust Base Unit Test Mode?
  • Page 52 KX-TG254SK/KX-TGA470S 10.1.5.2. Handset Does Handset make link with Base Unit? Handset is OK. Check Base Unit. (Correct working unit) Is the voltage of TP VBAT about 2.2~2.8 V? Check the batteries. Check around Power Supply Circuit/Reset Circuit. Is the voltage of TP VDDC about 1.8 V? Is the voltage of TP 3.0 V about 3.0 V? Adjust +3.0V Vottage to 3.0V Does the RF clock (CLK) oscillate: 13.824 MHz...
  • Page 53 KX-TG254SK/KX-TGA470S 10.1.6. Check the RF part 10.1.6.1. Finding out the Defective part 1. Prepare Regular HS(*1) and Regular BU(*2). 2. a. Re-register regular HS (Normal mode) to base unit (to be checked). If this operation fails in some ways, the base unit is defective. b.
  • Page 54 KX-TG254SK/KX-TGA470S 10.1.6.2. RF Check Flowchart Each item (1 ~ 5) of RF Check Flowchart corresponds to Check Table for RF part (P.43). Please refer to the each item. Start Link Control Check BBIC interface parts. confirmation signal (RF Block <->BBIC on BU/HS P.C.B) Normal confirmation X'tal...
  • Page 55 KX-TG254SK/KX-TGA470S 10.1.6.3. Check Table for RF part Item BU (Base Unit) Check HS (Handset) Check Link Confirmation Normal 1. Register Regular HS to BU (to be 1. Register HS (to be checked) to Regular checked). HS, BU Mode [Normal Mode] 2.
  • Page 56 KX-TG254SK/KX-TGA470S 10.1.6.4. TEST RANGE Check Circuit block which range is defective can be found by the following check. Item BU (Base Unit) Check HS (Handset) Check Range Confirmation TX TEST 1. Register Regular HS to BU (to be checked). 1. Register HS (to be checked) to Regular BU. (TX Power check) 2.
  • Page 57 KX-TG254SK/KX-TGA470S 10.1.7. Registering a Handset to the Base Unit The supplied handset and base unit arepre-registered. If for some reason the handset is not registered to the baseunit, re-register the handset. 1 Handset: {MENU} i # 1 3 0 2 Base unit: Press and hold MLOCATORN forabout 5 seconds until theregistration tone sounds.
  • Page 58 KX-TG254SK/KX-TGA470S 10.1.9. Check Handset Transmission Check MIC of handset. Check handset Tx in Signal Route. Cross Reference: Signal Route (P.25) 10.1.10. Check Handset Reception Check speaker of handset. Check handset Rx in Signal Route. Cross Reference: Signal Route (P.25) Note: When checking the RF part, Refer to Check the RF part (P.41).
  • Page 59 KX-TG254SK/KX-TGA470S 10.1.12. Check BT Communication Plug in the AC power source and wait 10 seconds. Operate to enter the menu of "Bluetooth" by using a handset Press [MENU] Bluetooth [SELECT] Is it possible to enter the menu of "Bluetooth"? Check the circuit of around RF parts of BT Is it possible to register BT_Headset? Module Check Voice Transmission of the BT_Headset...
  • Page 60 KX-TG254SK/KX-TGA470S Case1: OK AC power on PIO01 3.6sec 0.06sec 2.8sec 1.4sec Case2: NG1(fail to reset BT_IC) AC power on If BT_IC does not work, 1st and 2nd signals does not appear. Check the circuit of around PIO01 POWER and RESET parts of BT Module.

  • Page 61: Disassembly And Assembly Instructions

    KX-TG254SK/KX-TGA470S 11 Disassembly and Assembly Instructions 11.1. Disassembly Instructions 11.1.1. Base Unit Remove the 4 screws to remove the cabinet cover. Remove the solders. Cabinet cover Solders Remove the screw and pararell wire to remove the main P.C. board.
  • Page 62 KX-TG254SK/KX-TGA470S Remove the 2 screws to remove the Jack holder. Remove the 2 screws to remove the operational P.C.B board.
  • Page 63 KX-TG254SK/KX-TGA470S 11.1.2. Handset 2 screws Remove the 2 screws. Insert a plastic card. (Ex. Used SIM card etc.) Cabinet body between the cabinet body and the cabinet cover, then pull it along the gap to open the cabinet. Cabinet cover Likewise, open the other side of the cabinet.
  • Page 64 KX-TG254SK/KX-TGA470S 11.1.3. Charger Unit 2 charge terminals...

  • Page 65: How To Replace The Base Unit Lcd

    KX-TG254SK/KX-TGA470S 11.2. How to Replace the Base Unit LCD Fit the heatseal of a new LCD. Vertical Interval Tolerance 0.2mm New LCD Horizontal Interval Tolerance 0.2mm If interval tolerance between center lines is less than 0.2 mm, it is o.k. Operational P.C.B.
  • Page 66 KX-TG254SK/KX-TGA470S Attach the LCD and fix by hook A (two points).

  • Page 67: How To Replace The Handset Lcd

    KX-TG254SK/KX-TGA470S 11.3. How to Replace the Handset LCD Note: The illustrations are simplified in this page. They may differ from the actual product. P. C. board Vertical Interval Tolerance Peel off the FFC (Flexible Flat Cable) from 0.2 mm the LCD, in the direction of the arrow. Take care to ensure that the foil on the P.C.

  • Page 68: Measurements And Adjustments

    KX-TG254SK/KX-TGA470S 12 Measurements and Adjustments This chapter explains the measuring equipment, the JIG connection, and the PC setting method necessary for the measurement in Troubleshooting Guide (P.33) 12.1. Equipment Required • Digital multi-meter (DMM): it must be able to measure voltage and current. •...
  • Page 69 KX-TG254SK/KX-TGA470S 12.2.2. Connections (Handset) Connect the DC Power or Battery to BATT+ and BATT-. Connect the JIG cable GND (black) to GND. Connect the JIG cable UTX (yellow) to UTX and URX (red) to URX. URX (red) To Serial Port UTX (yellow) (com port 1*) GND (black)
  • Page 70 KX-TG254SK/KX-TGA470S 12.2.3. How to install Batch file into P.C. Insert the Batch file CD-ROM into CD-ROM drive and copy PNZZTG**** folder to your PC (example: D drive). <Example for Windows> On your computer, click [Start], select Programs Open an MS-DOS mode window. (All Programs for Windows XP/Windows Server 2003), then click MS-DOS Prompt.
  • Page 71 KX-TG254SK/KX-TGA470S 12.2.4. Commands See the table below for frequently used commands. Command name Function Example XBT 0 Base unit only. Type "sendchar XBT 0". For excluding failure of command response. Please send this command at first before other command is executed. *However, if you want to execute "#X"...

  • Page 72: Adjustment Standard (Base Unit)

    KX-TG254SK/KX-TGA470S 12.3. Adjustment Standard (Base Unit) When connecting the simulator equipment for checking, please refer to below. 12.3.1. Bottom View UART Oscilloscope C552 UTX URX C721 Q732 C521 R733 ANT1_TP Spectrum Analyzer Q731 C731 R735 R736 ANT2_TP C301 ANT_C3 R721 F301 3.0A +5.5V...

  • Page 73: Adjustment Standard (Charger Unit)

    KX-TG254SK/KX-TGA470S 12.4. Adjustment Standard (Charger Unit) When connecting the simulator equipment for checking, please refer to below. 12.4.1. Bottom View Digital Volt Meter /2 W DC POWER DC 5.5 V...

  • Page 74: Adjustment Standard (Handset)

    KX-TG254SK/KX-TGA470S 12.5. Adjustment Standard (Handset) When connecting the simulator equipment for checking, please refer to below. 12.5.1. Component View LED11 LED10 LED12 ANT_TP C801 RESET C804 C802 C814 C812 C813 C822 C820 C810 R807 C805 C806 ATSTP CKM/STM GND_J RSTN C96 C97 3.0V VBAT_MON...

  • Page 75: Things To Do After Replacing Ic Or X'tal

    KX-TG254SK/KX-TGA470S 12.6. Things to Do after Replacing IC or X'tal If repairing or replacing EEPROM and X'tal, it is necessary to download the required data such as Programming data or adjustment data, etc. in memory. The set doesn't operate if it is not executed. 12.6.1.
  • Page 76 KX-TG254SK/KX-TGA470S 12.6.1.2. Handset First, operate the PC setting according to The Setting Method of JIG (P.56). Then download the appropriate data according to the following procedures. Items How to download/Required adjustment EEPROM (IC3) Adjusted parameter data is stored in memory. 1) Default batch file: Execute the command “default.bat”.

  • Page 77: Frequency Table

    KX-TG254SK/KX-TGA470S 12.7. Frequency Table Ch. (hex) TX/RX Frequency (MHz) Channel 0 1928.448 Channel 1 1926.720 Channel 2 1924.992 Channel 3 1923.264 Channel 4 1921.536...

  • Page 78: Bluetooth Frequency Table

    KX-TG254SK/KX-TGA470S 12.8. Bluetooth Frequency Table Frequency (MHz) Frequency (MHz) Frequency (MHz) 2402 2435 2468 2403 2436 2469 2404 2437 2470 2405 2438 2471 2406 2439 2472 2407 2440 2473 2408 2441 2474 2409 2442 2475 2410 2443 2476 2411 2444 2477 2412 2445...

  • Page 79: Miscellaneous

    KX-TG254SK/KX-TGA470S 13 Miscellaneous 13.1. How to Replace the LLP (Leadless Leadframe Package) IC Note: This description is only applied on the model with Shield case. 13.1.1. Preparation • PbF (: Pb free) Solder • Soldering Iron Tip Temperature of 700 °F ± 20 °F (370 °C ± 10 °C) Note: We recommend a 30 to 40 Watt soldering iron.
  • Page 80 KX-TG254SK/KX-TGA470S 13.1.4. How to Install the IC 1. Place the solder a little on the land where the radiation GND pad on IC bottom is to be attached. Soldering Iron Land Solder P.C.Board 2. Place the solder a little on the land where IC pins are to be attached, then place the IC. Note: •...

  • Page 81: How To Replace The Flat Package

    KX-TG254SK/KX-TGA470S 13.2. How to Replace the Flat Package IC Even if you do not have the special tools (for example, a spot heater) to remove the Flat IC, with some solder (large amount), a soldering iron and a cutter knife, you can easily remove the ICs that have more than 100 pins. 13.2.1.
  • Page 82 KX-TG254SK/KX-TGA470S 13.2.3. How to Install the IC 1. Temporarily fix the FLAT PACKAGE IC, soldering the two marked pins. *Check the accuracy of the IC setting with the corresponding soldering foil. 2. Apply flux to all pins of the FLAT PACKAGE IC. 3.

  • Page 83: Terminal Guide Of The Ics, Transistors And Diodes

    KX-TG254SK/KX-TGA470S 13.3. Terminal Guide of the ICs, Transistors and Diodes 13.3.1. Base Unit (Reverse View) PNWI1TG7731H PNWI2TG7741H C0JBAQ000247 C0DBEYY00102 C1CB00003663 PNWI3TG7741H B1ACGP000008 Cathode Anode B1ABDM000001 B1ADGE000012 2SC6054JSL DSC7003S0L DA2J10100L PSVTUMG11NTR PQVDMD5S Cathode Cathode (Reverse View) Cathode Anode Anode Anode Anode Cathode B3AAB0000347 B0ECKM000008...

  • Page 84: Schematic Diagram

    KX-TG254SK/KX-TGA470S 14 Schematic Diagram 14.1. For Schematic Diagram 14.1.1. Base Unit (Schematic Diagram (Base Unit_Main)) Notes: 1. DC voltage measurements are taken with voltmeter from the negative voltage line. Important Safety Notice: Components identified by mark have special characteristics important for safety.
  • Page 85 KX-TG254SK/KX-TGA470S Memo...

  • Page 86: Schematic Diagram (Base Unit_Main)

    KX-TG254SK/KX-TGA470S 14.2. Schematic Diagram (Base Unit_Main) +3.0V C751 0.1u IC751 SP_LED 1 QB BT_HS_LED(R) 2 QC BT_HS_LED(G) SPI2_DO 3 QD R753 CELL1_LED(R) 4 QE *RCLR CELL1_LED(G) IO_LE 5 QF CELL2_LED(R) SPI2_CLK 6 QG Q653 CELL2_LED(G) IO_CLR 7 QH BT_HS_LED(R) *SCLR 5 C1 8 GND QH’...
  • Page 87 KX-TG254SK/KX-TGA470S Q141 REFERENCE R160 1XX : TEL LINE 3XX : POWER, CHARGE 4XX : MIC, SP Q161 5XX : BBIC R141 6XX : FLASH, EEPROM, KEY, LCD 7XX : FOR DK/BT 100k 8XX : RF C165 NC C163 NC C173 R164 R161 2.7k...

  • Page 88: Schematic Diagram (Base Unit_Rf)

    KX-TG254SK/KX-TGA470S 14.3. Schematic Diagram (Base Unit_RF) ANT_1 ANT_2 ANT1_TP ANT2_TP C853 C851 W 0.15mm W 0.15mm L 22+/-4mm L 22+/-4mm 1st or 4th layer 1st or 4th layer DA802 GNDGND W 0.15mm L 20+/-2mm 3rd layer R807 RXON C826 C863 RF_RXn from Handset C864...

  • Page 89: Schematic Diagram (Base Unit_Operation)

    KX-TG254SK/KX-TGA470S 14.4. Schematic Diagram (Base Unit_Operation) LED905 R901 R902 LED906 *LED911 R903 LED907 CELL1_LED(R) *LED916 GREEN R904 LED908 BT_HS_LED(G) *LED915 BT_HS_LED(R) LED902 MEG_LED LED901 ANS_LED LCD_BLT CN901 LCD_GND 10pin:TG4731 13pin:TG7731 C901 LCD_RST /RSTB LCD_CS /CSB LCD_CD LCD_SID LCD_SCL SCLK LCD_VDD VDD1 VDD2 C902...

  • Page 90: Schematic Diagram (Handset_Main)

    KX-TG254SK/KX-TGA470S 14.5. Schematic Diagram (Handset_Main) Charge Current VBAT VBAT BAT+ 2.5A BAT- Battery CHG_CUR When on Charge CP3V 0.1u 3.3k EEP_WP EEP_WP E_WP EEP_SCL EEP_SCL E_SCL 1000p EEP_SDA EEP_SDA E_SDA CHG+ *IC3 CHG+ * Start Monitor CHARGE * When "SFR" command Terminal TO RF BLOCK is executed, 13.824 MHz...
  • Page 91 KX-TG254SK/KX-TGA470S RF BLOCK ANT-Short-GND R807 ANT-Short RXON W 0.15mm ANT-Pattern L 20mm W 0.15mm/L 7mm 3rd layer W 0.5mm /L 5mm C826 1st layer RX_RF C803 1.3p C812 L809 8.2n DA801 W 0.15mm TX_RF L 20mm 3rd layer W 0.2mm R806 L 10.0mm W 0.2mm...

  • Page 92: Schematic Diagram (Charger Unit)

    KX-TG254SK/KX-TGA470S 14.6. Schematic Diagram (Charger Unit) 1 (0.5W) 1 (0.5W) SCHEMATIC DIAGRAM (Charger Unit)

  • Page 93: Printed Circuit Board

    KX-TG254SK/KX-TGA470S 15 Printed Circuit Board 15.1. Circuit Board (Base Unit_Main) 15.1.1. Component View C851 C843 C306 IC302 ANT_2 ANT_1 IC721 R781 BT_CTS C782 C853 BT_URX R791 TP_ANT_C3 P101 C844 SA101 DA802 CELL1_LED(R) CELL1_LED(G) BT_HS_LED(G) CELL2_LED(R) C858 R753 C751 SA103 C841 R752 R754 BT_HS_LED(R)
  • Page 94 KX-TG254SK/KX-TGA470S 15.1.2. Bottom View For JIG BT_01 C552 UTX URX C721 Q732 C521 R733 ANT1_TP Q731 C731 R735 R736 ANT2_TP C301 ANT_C3 R721 F301 3.0A +5.5V ANT_BT TP_ANT_BT R751 Q652 Q653 IC611 C115 L661 C663 C662 R611 C664 C611 C602 R606 R613 R601...

  • Page 95: Circuit Board (Base Unit_Operation)

    KX-TG254SK/KX-TGA470S 15.2. Circuit Board (Base Unit_Operation) LED901 R901 C903 R903 LED907 LED905 ERASE R904 R902 LED908 LED906 C902 C901 STOP LOCAT/INT MSG1 MSG2 TG773xH LED902 SKIP TG473xH MSG4 MSG3 PNLB2049Z DOWN KX-TG254 CIRCUIT BOARD (Base Unit_Operation (Component View))
  • Page 96 KX-TG254SK/KX-TGA470S Memo...

  • Page 97: Circuit Board (Handset_Main)

    KX-TG254SK/KX-TGA470S 15.3. Circuit Board (Handset_Main) 15.3.1. Component View LED11 LED10 LED12 ANT_TP C801 ANT-TP RESET ANT-GND C804 C802 C814 C812 C813 C810 C822 C820 R807 C805 C806 ATSTP CKM/STM CKM/STM GND_J RSTN (CLK:13.824MHz) C96 C97 3.0V (Output) 3.0V VBAT_MON VBG/CHG_MON VDDC MIC+ MIC+...
  • Page 98 KX-TG254SK/KX-TGA470S 15.3.2. Bottom View CN3_C PNLB2012Z LED7 LED9 LED9 SOFT_A SOFT_B SOFT_C FLASH LED1 LED2 LEFT RIGHT DOWN TALK KX-TGA470 CIRCUIT BOARD (Handset_Main (Bottom View))

  • Page 99: Circuit Board (Charger Unit)

    KX-TG254SK/KX-TGA470S 15.4. Circuit Board (Charger Unit) 15.4.1. Component View CIRCUIT BOARD (Charger Unit (Component View)) 15.4.2. Bottom View CIRCUIT BOARD (Charger Unit (Bottom View))

  • Page 100: Exploded View And Replacement Parts List

    KX-TG254SK/KX-TGA470S 16 Exploded View and Replacement Parts List 16.1. Cabinet and Electrical Parts (Base Unit) E1 (*1) PCB1 PCB2 Ref.No. Figure 2.6 x 8mm Note: (*1) This cable is fixed by welding. Refer to How to Replace the Base Unit LCD (P.53)

  • Page 101: Cabinet And Electrical Parts (Handset)

    (*1) This cable is fixed by welding. Refer to How to Replace the Handset LCD (P.55). (*2) The rechargeable Ni-MH battery HHR-4DPA is available through sales route of Panasonic. (*3) Attach the SPACER (No. 121) to the exact location described above.

  • Page 102: Cabinet And Electrical Parts (Charger Unit)

    KX-TG254SK/KX-TGA470S 16.3. Cabinet and Electrical Parts (Charger Unit) 200-1 PCB200 200-3 200-2 200-4 Ref.No. Figure 2×8 mm φ...

  • Page 103: Accessories

    KX-TG254SK/KX-TGA470S 16.4. Accessories A3, A4...

  • Page 104: Replacement Parts List

    KX-TG254SK/KX-TGA470S 16.5. Replacement Parts List Safety Ref. Part No. Part Name & Description Remarks 1. RTL (Retention Time Limited) PNJK1146W KEYBOARD SWITCH, TAM Note: PNLA1047Z ANTENNA, SUB PNLA1052Z ANTENNA, BT The “RTL” marking indicates that its Retention Time is PNHR1584Z GUIDE, JACK PS-HB Limited.
  • Page 105 KX-TG254SK/KX-TGA470S Safety Ref. Part No. Part Name & Description Remarks Safety Ref. Part No. Part Name & Description Remarks R107 D0GA102JA021 1k R735 ERJ2RKF4702 R108 D0GA102JA021 1k R736 ERJ2GEJ223 R109 ERJ2GEJ823 R738 ERJ2RKF3302 R110 ERJ2GEJ823 R751 D0GA102JA021 1k R111 D0GA392JA015 3.9k R752 ERJ2GEJ184 180k...
  • Page 106 KX-TG254SK/KX-TGA470S 16.5.2. Handset Safety Ref. Part No. Part Name & Description Remarks C611 ECUE1A104KBQ 0.1 16.5.2.1. Cabinet and Electrical Parts C661 ECUE1A104KBQ 0.1 C721 ECUE1A104KBQ 0.1 C731 ECUE1A104KBQ 0.1 Safety Ref. Part No. Part Name & Description Remarks C751 ECUE1A104KBQ 0.1 C802 F1G1H1R8A480 1.8p PNGP1228Z2...
  • Page 107 KX-TG254SK/KX-TGA470S Safety Ref. Part No. Part Name & Description Remarks Safety Ref. Part No. Part Name & Description Remarks LED12 B3ACB0000190 LED ECUE1A104KBQ 0.1 (COILS) ECUE1A104KBQ 0.1 C812 PQLQR4C8N2J COIL ECUE0J105KBQ 1 G1CR18J00004 COIL ECUV1A225KBV 2.2 (RESISTOR ARRAYS) ECJ1VB0G106M 10 D1H83314A013 RESISTOR ARRAY ECUE1H102KBQ 0.001 D1H83314A013 RESISTOR ARRAY...
  • Page 108 KX-TG254SK/KX-TGA470S 16.5.6. Fixtures and Tools Safety Ref. Part No. Part Name & Description Remarks Note: E106 PQHG10729Z RUBBER PARTS, RECEIVER (*1) See Equipment Required (P.56), and The Setting E107 PNVE1002Z BATTERY TERMINAL ABS-HB Method of JIG (P.56) K2HD103D0001 JACK K5H252Y00002 FUSE (*2) When replacing the Handset LCD, See How to H0J138500003 CRYSTAL OSCILLATOR (*2) Replace the Handset LCD (P.55)

This manual is also suitable for:

Kx-tga470m

Table of Contents