Briggs & Stratton Victa Operator's Manual
Hide thumbs
Also See for Victa:
- Assembly and owner's manual (20 pages) ,
- Assembly and owner's manual (28 pages)
Table of Contents
Advertisement
Pressure Washer
Operator's Manual
This pressure washer is rated in accordance to the Pressure Washer Manufacturers Association
(PWMA) standard PW101 (Testing and Rating Performance of Pressure Washers).
BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC
MILWAUKEE, WISCONSIN, U.S.A.
Manual No. 315148GS Revision A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Briggs & Stratton Victa
Summary of Contents for Briggs & Stratton Victa
-
Page 1: Pressure Washer
Pressure Washer Operator’s Manual This pressure washer is rated in accordance to the Pressure Washer Manufacturers Association (PWMA) standard PW101 (Testing and Rating Performance of Pressure Washers). BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC MILWAUKEE, WISCONSIN, U.S.A. Manual No. 315148GS Revision A... - Page 2 You never have to look far to find Victa support and service for your pressure washer. There are many authorized service dealers who provide quality service. You can also contact Victa Customer Service by phone at 1800 356 632, or on the Internet at www.victa.com.au or BRIGGSandSTRATTON.COM.
-
Page 3: Table Of Contents
Table of Contents Operator Safety ....... . . 4 Equipment Description......... 4 Important Safety Information. -
Page 4: Operator Safety
WARNING indicates a hazard which, if not avoided, could result in death or serious injury. CAUTION indicates a hazard which, if not avoided, could result in minor or moderate injury. NOTICE address practices not related to personal injury. www.victa.com.au... - Page 5 WARNING Running engine gives off carbon WARNING Fuel and its vapors are extremely flammable monoxide, an odorless, colorless, poison gas. and explosive which could cause burns, Breathing carbon monoxide could result in death, fire or explosion resulting in death, serious injury, headache, fatigue, dizziness, serious injury and/or property damage.
- Page 6 Power Products authorized parts ONLY. If equipment is used with caught in the starter or other rotating parts. parts that DO NOT comply with minimum specifications, user assumes all risks and liabilities. • Tie up long hair and remove jewelry. www.victa.com.au...
-
Page 7: Assembly
Assembly Attach Handle and Accessory Tray 1. Place handle (A) onto handle supports (B) connected to Read entire operator’s manual before you attempt main unit. Make sure holes (C) in handle align with to assemble or operate your new pressure washer. holes (C) on handle supports. -
Page 8: Add Engine Oil
If you experience starting or performance problems after using fuel, switch to a different fuel provider or change brands. This engine is certified to operate on gasoline. The emission control system for this engine is EM (Engine Modifications). www.victa.com.au... -
Page 9: Lubricate O-Rings
Lubricate O-Rings Lubricate all connections shown below, following these instructions: Lubrication of o-rings is extremely important for installation 1. Inspect and clean connecting surfaces prior to and operation. The use of a lubricant (petroleum or synthetic lubrication and assembly. grease) during assembly helps seat o-rings properly and provides an improved seal. -
Page 10: Connect Hose And Water Supply To Pump
4. Attach garden hose adapter (B) to water inlet. Tighten by hand. 5. Run water through your garden hose for 30 seconds to clean out any debris. NOTICE DO NOT siphon standing water for the water supply. Use ONLY cold water (less than 38°C (100°F)). www.victa.com.au... -
Page 11: Features And Controls
Features and Controls Read this Operator’s Manual and safety rules before operating your pressure washer. Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. A - Spray Gun — Controls the application of water onto M - Detergent Siphoning Tube/Filter —... -
Page 12: Operation
7. Choose spray tip you want to use, pull back on collar of nozzle extension, insert spray tip and release collar. Tug on spray tip to make sure it is securely in place. See How to Use Spray Tips. www.victa.com.au... - Page 13 8. Move throttle lever (A) to “Fast” position , shown WARNING Starter cord kickback (rapid retraction) will pull hand and arm toward engine faster than you as a rabbit. can let go which could cause broken bones, fractures, bruises, or sprains resulting in serious injury.
-
Page 14: How To Stop Your Pressure Washer
• If you get spray tip too close, especially using a high accessory tray on front of tray, as shown. pressure spray tip, you may damage surface being cleaned. • DO NOT get closer than 15 cm (6 in) when cleaning tires. www.victa.com.au... -
Page 15: Cleaning And Applying Detergent
Cleaning and Applying Detergent 2. Select and install desired high pressure spray tip following instructions How to Use Spray Tips. WARNING Chemical Burn Hazard. 3. Keep spray gun a safe distance from area you plan to Chemicals could cause burns resulting in death, spray. -
Page 16: Maintenance
Examine the screen on the pump’s water inlet. Clean it if the 1800 356 632 for assistance. screen is clogged or replace it if screen is damaged. Some adjustments will need to be made periodically to properly maintain your pressure washer. www.victa.com.au... - Page 17 Check High Pressure Hose 5. Slowly push down until you feel the ball move slightly, push no more than 3 cm (1/8 in). Slight pressure may The high pressure hose can develop leaks from wear, be required to free the ball. kinking, or abuse.
-
Page 18: Engine Maintenance
NOTICE Overfilling with oil could cause the engine to not outdoor temperature range expected. start, or hard starting. • DO NOT overfill. • If over the FULL mark on dipstick, drain oil to reduce oil level to FULL mark on dipstick. 4. Replace and tighten dipstick. www.victa.com.au... - Page 19 Changing Engine Oil 2. Carefully remove air cleaner assembly to prevent debris from falling into carburetor. If you are using your pressure washer under extremely dirty or dusty conditions, or in extremely hot weather, change the 3. Take air cleaner assembly apart and clean all parts. oil more often.
-
Page 20: After Each Use
WHEN STORING FUEL OR EQUIPMENT WITH FUEL IN TANK • Store away from furnaces, stoves, water heaters, clothes dryers, or other appliances that have pilot light or other ignition source because they could ignite fuel vapors. www.victa.com.au... -
Page 21: Winter Storage
Winter Storage Change Engine Oil While engine is still warm, drain oil from crankcase. Refill with recommended grade. See Changing Engine Oil in Engine NOTICE You must protect your unit from freezing Maintenance. temperatures. • Failure to do so will permanently damage your pump and render Protecting the Pump your unit inoperable. -
Page 22: Troubleshooting
6. Bad spark plug. 6. Replace spark plug. 7. Water in fuel. 7. Drain fuel tank; fill with fresh fuel. 8. Excessively rich fuel mixture. 8. Contact local service facility. Engine lacks power. Dirty air filter. Replace air filter. www.victa.com.au... -
Page 23: Warranties
For warranty service, find the nearest Authorized Service Dealer in our dealer locator map at BRIGGSandSTRATTON.COM or www.victa.com.au. THERE IS NO OTHER EXPRESS WARRANTY. IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR FROM PURCHASE, OR TO THE EXTENT PERMITTED BY LAW. -
Page 24: Specifications
* This pressure washer is rated in accordance to the Pressure Washer Manufacturers Association (PWMA) standard PW101 (Testing and Rating Performance of Pressure Washers). Briggs & Stratton Power Products Group, LLC P.O. Box 702 Milwaukee, Wisconsin, 53201-0702 U.S.A. 1800 356 632 www.victa.com.au...
Need help?
Do you have a question about the Victa and is the answer not in the manual?
Questions and answers