Spypoint XCEL STREAM User Manual page 12

XCEL STREAM Application "LOCAL"
CAR DVR SETTINGS (DASH CAM)
These settings are available in Dash cam mode only.
Car DVR Settings
1
Voice Record
2
3
LCD Auto Off
4
Motion Detector
5
Delayed Shutdown
6
G-Sensor
View
1. Enables or disables sound recording.
2. Enables or disables auto recording on 12V. When the camera is powered
by a 12V source, for example on an ATV, recording automatically starts
when engine starts.
3. When this option is enabled, the screen of the camera turns off after
60 seconds of inactivity. When the screen turns of and a video is being
recorded, the indicator flashes green to indicate that the camera is still
recording.
Note: To turn the screen on again, press one of the two camera
buttons.
4. This option allows to trigger recording by movement detection. When
the camera is powered by a 12V source and that the power stops, the
user has to choose to activate the movement detection or to turn the
camera off.
If the user chooses to activate movement detection, the camera
will record 60 second videos at each movement detection.
5. When the camera is powered by a 12V source and that the power
stops, the user has to choose either to continue recording or to turn off
the camera. By pressing "Active", the camera will continue to record
until it runs out of batteries.
ON OFF
ON OFF
ON OFF
ON OFF
ON ON OFF OFF
ON OFF
ON OFF
ON OFF
H L OFF
Album Setup
6. Allows to automatically record emergency videos in case of impact.
H: Small impacts will trigger an emergency video.
L: Impacts have to be important in order to trigger an emergency
video.
OFF: Emergency videos can only be triggered manually (see p.8 for
more details)
12