Spypoint XCEL STREAM User Manual page 11

XCEL STREAM Application "LOCAL"
SETUP
Allows to configure the advanced settings. There are three categories of
settings: Camcorder settings, Internet settings and Car DVR settings (Dash
cam).
Home
Camcoder Settings
1
Camera ID
Camera Name
Password
Confirm
2
Date & Time
3
Resolution
4
Operating Sound
5
Factory Setting
6
1.4 GB
7
Language
CAMCORDER SETTINGS
1. The camera ID is the default camera ID.
The camera name is the name the user gives to the camera to easily
identify it. A password can be set but is not necessary.
Note: The password is not case sensitive.
2. Synchronizes date and time with the mobile.
Save Save
Setup
P2-FA006036
Your camera
2013 / 01 / 01
12:34 AM
FHD SHD
ON ON OFF OFF
ON OFF
Reset
Format
2.6 GB
English
3. Allows to choose the video resolution (Full HD or Super HD). Here is a
table showing the different resolutions depending on the recording type.
Recording on SD card
FHD 1920 X 1080
SHD 2304 X 1296
*
If SHD resolution is not supported by the mobile, videos willl not be
recorded properly. To know if it works on your mobile, record a video in
that resolution and try viewing it.
4. Enables or disables the operating sounds of the camera.
5. Resets factory settings.
6. Allows to format SD card and to attribute space for each of the modes
(Action cam and Dash cam).
7. Allows to choose the language of the camera menu.
INTERNET SETTINGS
Allows to set an email and access point to be able to live stream in "Inter-
net". Choose the access point that will be used to connect to the internet.
11
Recording on mobile
800 X 480
*
800 X 480
Internet Settings
Email STREAM@spypoint.com
AP WiFi_Wireless_02