Spypoint XCEL 4K Quick Start Manual

In the box


Quick start guide
Quick start
guide
Action video
camera
2x Lithium-ion
Models:
Polymer battery
XCEL 4K
XCEL 1080
& comparable
Flat adhesive mount
User manual, latest firmware & FAQ

available at: support.spypoint.com
tech@spypoint.com

Leash
 1-888-779-7646
v1.2
Note: Memory cards and additional mounts are sold separately.
* Mounts & accessories may differ across comparable models.
Refer to website or packaging for full details
*

Components

Select / Shutter Button
1
2 Power / Mode Button
Up Button
3
4 Speaker
USB cable 5 Down Button / WiFi
USB power adaptor
Battery case
6
1
Scope mount Bow mount
2
3
4
5
Quick release
stands Lens cleaning
cloth
6
Getting started
7 Status LED

iNsertiNg the MiCrosd Card

Lens
8
Insert a microSD memory card in the card slot, gold contacts facing the
9 Microphone
front of the XCEL. The card is inserted correctly when a click is heard.
MicroSD Slot
10

reMoViNg the MiCrosd Card

Micro-USB port
11
HDMI port
12 Lightly press the memory card into the camera once to pop it out of
the slot and remove it.
Screen
13
Note: The card must have a minimum rating of Class 10 or UHS-1,
and a capacity up to 64GB (not included). See the AVAILABLE
ACCESSoRIES section.

ChargiNg the CaMera

The camera can be charged with:
1. A wall socket by using the USB power adaptor
2. A USB power source (e.g. a computer)
To charge the battery:
1. Connect the camera to a USB power source.
(Charging time: 4 hours)

exterNaL power sourCe For exteNded use

7
While using the camera, an external power source can be used to pro-
8
vide continuous power and allow a longer autonomy period. All of the
power sources shown can be used to power the camera continuously
during use.
9
10
11
12
13

iNstaLLiNg the QuiCk reLease staNd

Time Laspe
Settings

CapturiNg Video + photos

to start/stop Video:
If the Video mode icon on your camera's LCD screen is not showing,
Note: The XCEL mount adaptor is designed to attach securely and press the power/Mode Button repeatedly until it appears.
adequately to the anchorage system of the camera and
Press the shutter/select Button, the camera will emit one beep and
resist to activities with impact.
the Camera will start recording. The camera Status LED will flash while
recording. Press the shutter/select Button again and the camera

turNiNg oN the CaMera

will emit one beep to indicate recording has stopped.
To turn oN the camera, press the power/Mode Button.
to start/stop photos:
To turn oFF the camera, press and hold the power/Mode Button a
If the photo, Burst photo or time Lapse icon on your camera's
few seconds until the screen shuts down.
LCD screen is not showing, press the power/Mode Button repeatedly
until the mode you want appears.

CyCLe through the Modes

Press the shutter/select Button to take a picture. The camera will
You can cycle through the camera modes with the power/Mode Button.
emit a camera shutter sound each time a photo is taken. If in TiMe
Lapse, press the shutter/select Button to stop taking pictures.
Vidéo Record a Video.
Photo Capture a single photo.
BurstPhoto Your camera will take 3 photos in 1.5 seconds.
Your camera will shoot a series of photos at set
time intervals. The camera will initates a count-
down and emit a camera shutter sound each time
a Photo is taken.
Adust camera settings, resolution and more.