Manually Configure Ipv4 Tcp/Ip Parameters From The Control Panel; Manually Configure Ipv6 Tcp/Ip Parameters From The Control Panel - HP Officejet Enterprise Color MFP X585 User Manual

3. On the Device Information page, the default product name is in the Device Name field. You can change
this name to uniquely identify this product.
NOTE:
4. Click the Apply button to save the changes.

Manually configure IPv4 TCP/IP parameters from the control panel

Use the control-panel
gateway.
1. From the Home screen on the product control panel, scroll to and touch the
2. Open the following menus:
● Network Settings
● Jetdirect Menu
● TCP/IP
●
IPV 4 Settings
●
Config Method
3. Select the
4. Open the
5. Touch the
6. Touch the first field to open a keypad. Enter the correct digits for the field, and then touch the
button.
Repeat the process for each field, and then touch the

Manually configure IPv6 TCP/IP parameters from the control panel

Use the control-panel
1. From the Home screen on the product control panel, scroll to and touch the
2. To enable manual configuration, open the following menus:
● Network Settings
● Jetdirect Menu
● TCP/IP
●
IPV6 Settings
●
Address
●
Manual Settings
●
Enable
Select the
ENWW
Completing the other fields on this page is optional.
Administration menus to manually set an IPv4 address, subnet mask, and default
Manual option, and then touch the
Manual Settings menu.
IP Address, Subnet Mask, or
Administration menus to manually set an IPv6 address.
On option, and then touch the
Save button.
Default Gateway option.
Save button.
Save button.
Administration button.
OK
Administration button.
Configure IP network settings 85