The Indoor Unit Address Setting method
The Indoor Unit Address Setting Method
Multi V CRU(N)N
The indoor unit PCB has 2 rotary switches.
Rotary high is for group number setting and Rotary low is for room number setting.
The group number of the rotary switch of the Central controller and the indoor unit PCB
rotary switch must match.
Example : Group number setting method(Central controller group rotary switch number 0 =
The indoor unit PCB rotary switch Group number 0)
Example : The indoor unit number setting method (the indoor unit PCB rotary switch
number 1 = Central controller LED number 1 turns ON)
16 Deluxe central controller
Rotary_low
Rotary_high
Rotary_low
Indoor unit number 1
on Central control
Rotary_high
Group number 1
on Central control
Indoor unit
no. setting
Group unit
no. setting