Doing Laundry; Doing Laundry Using The Cycle Selector - Samsung WF80F5 series User Manual

Doing laundry

Doing laundry using the Cycle Selector

Your new washing machine makes washing laundry easy, using Samsung's automatic control system "Fuzzy
Control". When you select a wash cycle, the machine will set the correct temperature, washing time, and
washing speed.
1. Turn the water supply on.
2. Press the Power button to turn the power on.
3. Open the door.
4. Add your laundry loosely into the drum without overfilling it.
5. Close the door.
6. Add detergent, and if necessary, softener or prewash detergent into the appropriate compartments in
the detergent drawer.
The Prewash function is only available when selecting the Cotton, Synthetics, Denim, Stain Away,
Dark Garment, Daily Wash, Super Eco Wash and Baby Care cycles. It is only necessary if your
clothing is heavily soiled.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material: Cotton,
Synthetics, Denim, Stain Away, Dark Garment, Daily Wash, Super Eco Wash, Outdoor Care, Baby Care, Wool
and Hand Wash. The relevant indicators will light up on the control panel.
8. At this time, you can control the wash temperature, the number of rinse cycles, the spinning speed, and
the delay time by pressing the appropriate buttons.
9. Press the Start/Pause button to start the wash. The progress indicator will light up and the remaining
time for the cycle will appear on the display.
Both the total cycle time and the number of rinse cycles in the Cotton cycle may vary depending
on the amount of laundry.
10. After the total cycle has finished, the power will turn off automatically. Open the door and remove the
laundry.
Pausing the wash
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the Start/Pause button to unlock the door.
If the water level or the water temperature inside the drum is too HIGH the door is not opened
with the blinking "Door Lock
will take approximately 1 or 2 minutes until the indicator stops blinking.)
2. Open the door and add/remove the laundry.
3. After closing the door, press the Start/Pause button to restart the wash.
F500E_WF80F5E-03234K-02_EN.indd 27
" indicator. In this case, wait until the indicator stops blinking. (It
English - 27
2014-01-15 4:23:19