Call Waiting; Flash; Last Number Redial - GE 21095 User Manual

3. Press the MUTE/program button to save your selection, and the ringer
setting shows in the display for two seconds then returns to standby mode.
C W
ALL AITING
If you subscribe to the combined Call Waiting Caller ID service from your local
telephone company, you will receive Caller ID information (if available) on Call
Waiting calls. During a phone call you will hear a beep, which indicates
another call is waiting on the line, and Caller ID information shows in the
handset display. To connect to the waiting call, press the flash button on the
handset or base, and your original call is put on hold. You may switch back
and forth between the two calls by pressing the flash button.
F
LASH
Use the flash/delete button on the handset or base to activate custom
calling services, such as call waiting, which are available through your
local phone company.
TIP: Don't press the talk/callback button on the handset or the speaker/
callback button on the base to activate a custom calling service, such as call
waiting, or you'll hang up the phone.
L N
AST UMBER
You may redial a number up to 32 digits long. If the number is longer than
32 digits, you will hear an error tone. To quickly redial the last number you
dialed:
1. Press the talk/callback button on the handset or the speaker/callback
button on the base.
2. Press the redial button.
-OR-
RINGER = LOW
R
EDIAL
27