Types 8013, 8716, 8976, 8986, 9266, 9282, 9374, 9384, And 9647 - Lenovo ThinkCentre 8700 Hardware Maintenance Manual

14. Install the heat sink and fan assembly on the system board.
15. Connect the heat sink and fan assembly cable to the system board. See the
16. Position the fan duct on the heat sink fan.
17. Go to "Completing the FRU replacement" on page 124.

Types 8013, 8716, 8976, 8986, 9266, 9282, 9374, 9384, and 9647

108
Hardware Maintenance Manual
system board illustration for your machine type at "Identifying parts on the
system board" on page 89.
Important
The heat sink and microprocessor might be very hot. Make sure these
components are cool enough to safely handle before continuing this
procedure.
1. Remove the cover. See "Removing the cover" on page 87.
2. Lift the fan duct off the heat sink fan.
3. Disconnect the heat sink and fan assembly cable from the system board. See
the system board illustration for your machine type at "Identifying parts on
the system board" on page 89.
4. Rotate handle 1 to release the heat sink clamp and then disengage the
clamp from the plastic retention bracket.