- MOTION : This product
generates signals
each time an object
movement is detected
in the four areas of
the screen so efficient
monitoring can be
achieved.
y DET. SIZE : Selects an object size to detect on the screen.
y DET. AREA : Set the areas of
motion detection.
` SEL AREA : Select from four
areas that users
want.
` MODE : Determine whether to
use the selected area.
` SENSITIVITY : Set the
sensitivity of
the motion
detection.
When you adjust the higher level, the more sensitive.
` TOP/BOTTOM/LEFT/RIGHT : Area location can be adjusted.
` RETURN : Return to the MOTION DET menu.
y NON DET. AREA : Specify a detection exception area to mask.Select a
` SEL AREA : You can select up to 4 areas.
` MODE : Determines whether to use the area selected in the AREA.
` TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area.
` RETURN : Return to the MOTION DET menu.
y INDICATOR : If an object moves in a pattern set by the user, it will be
displayed on the screen as a box.
y ALARM OUT : When object movement is detected, the detection signal will
be outputted.
` EXTERNAL : Send signals through external terminals.
` OSD : Display signals on the screen.
RETURN : Return to the MOTION DET menu.
`
y RETURN : Return to the VIDEO ANALYTICS menu.
DET. SIZE
▶
1.
DET. AREA
2.
NON DET. AREA
3.
4. INDICATOR
ALARM OUT
5.
RETURN
6.
SEL AREA
▶
1.
MODE
2.
SENSITIVITY
3.
TOP
4.
BOTTOM
5.
LEFT
6.
RIGHT
7.
RETURN
8.
mask area number and specify the size and position.
MOTION DET
MOTION DETECT AREA
----
----
--------
--------
--------
--------
English_29
OFF
AREA
1
ON
5
1
100
1
100