Introduction
back
function jack
❽
GREEN(485 –) : Signal port for RS-485- communication.
YELLOW(485+) : Signal port for RS-485+ communication.
BLUE (ALARM OUT) : Output port that signals when a motion is detected.
GRAY(EXT_D/N) : External signal input port for Day/Night mode setup.
BLACK(GND) : Earth-grounding port for external signal.
Video output jack : Video signals are output through this port. Connect this port to the Video
❾
IN port of a monitor.
Power input terminal : Connect the power as specified for each model here.
❿
12_ introduction