Site Preparation; Package Contents; Nx-7500 Series Accessories - Motorola NX-7510 Series Installation Manual

6 NX-7510/NX-7520/NX-7530 Series Integrated Services Platform

1.3 Site Preparation

• Consult your site survey and network analysis reports to determine specific equipment placement, power
drops, and so on.
• Assign installation responsibility to the appropriate personnel.
• Identify and document where all installed components are located.
• Provide a sufficient number of power drops for your equipment.
• Ensure adequate, dust-free ventilation to all installed equipment.
• Identify and prepare Ethernet and console port connections.
• Verify cable lengths are within the maximum allowable distances for optimal signal transmission.

1.4 Package Contents

An NX-7500 series Integrated Services Platform ships with the following:
• NX-7500 series Integrated Services Platform
• Console cable
• Rack mount brackets
• NX-7510/NX-7520/NX-7530 Integrated Services Platform Installation Guide (this document)

1.4.1 NX-7500 Series Accessories

The following accessories are available for NX-7500 series Integrated Services Platform:
• 2 port 10Gb Network Mezzanine Card (NMC) module for use with 10Gb SFP+ transceivers
• 10GbPS short range 850nm multi-mode SFP+ transceiver for use with 10Gb NMC
• 10GbPS long range 10km single-mode SFP+ transceiver for use with 10Gb NMC
• 4 port 10Gb NMC Module for use with 1Gb SFP transceivers
• 1GbPS short range SFP transceiver for use with 1Gb NMC
• 1GbPS long range SFP transceiver for use with 1Gb NMC
• Spare AC power supply for NX-7510 or NX-7530
• Spare DC power supply for NX-7510 or NX-7530
• Mounting kit with sliding rails
• Spare 500GB hard drive for NX-7530