Advertisement
Quick Links
27822HSG
Introduction
Special features include:
•
4G Ready - built-in filter removes interference and
channel loss caused by 4G mobile phone signals
•
Dedicated inputs for UHF and FM/DAB
•
Side mounted terminals provide easy cable management
The SLx range of aerial boosters from Philex is
designed to improve picture and sound quality
by amplifying weak UHF, VHF and FM/DAB radio
signals. The SLx2 can also be used to boost/
distribute Digital Television and Sky™/ Sky+™ signals
around the home.
Please Note: To view output from the satellite RF2
output you will need a TV with an analogue tuner.
The SLx2 is not equipped with a digital bypass
and is not compatible with infra red extenders/
links which control Sky™ boxes from other rooms.
(Bypass kits are available - sold separately).
Careline: 08457 573 479 - (Local Rate UK only)
2 Way Signal Booster
USER GUIDE
Designed with style, sophistication and value in
mind, the SLx range is the preferred choice for both
the professional aerial installer and the home user
wanting to get the very best performance from their
AV equipment.
With full instructions and wall mounting template,
installing the SLx2 aerial amplifier is both quick
and easy.
Support: www.philex.com/support
Ready
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SLX 27822HSG
Summary of Contents for SLX 27822HSG
-
Page 1: User Guide
Designed with style, sophistication and value in designed to improve picture and sound quality mind, the SLx range is the preferred choice for both by amplifying weak UHF, VHF and FM/DAB radio the professional aerial installer and the home user signals. - Page 2 Installing your amplifier Aerial signal distribution You can choose to boost either TV or radio signals. 1. Connect your UHF aerial downlead (or your FM/ DAB aerial downlead) to the ANT socket. 2. Connect your TVs (or FM tuners) to either of the SLx2 TV1 or TV2 sockets in any combination.
- Page 3 Amplifier features Short circuit protection For added safety the SLx2 has built-in short circuit protection. Should a short circuit be detected, the amplifier will shut down in order to prevent any possible damage. Should this occur, all outputs will be switched off but the power LED will remain lit. To reset the system following a short circuit, simply remove all outputs and inputs, switch off the amplifier and remove the power cable from...
- Page 4 Troubleshooting If you are experience reception problems after Problems with satellite television installing your SLx2, please see below: If you are experiencing any problems with your satellite television picture, check that all cables No picture or sound and connectors have been fitted correctly. If the problem persists it is probably due to the dish No signal is reaching your television due to a alignment or a temporary problem with the channel...
Need help?
Do you have a question about the 27822HSG and is the answer not in the manual?
Questions and answers