SLX 27820V User Manual

4 Way
Signal Booster
27820V
User Guide

Introduction

Congratulations on the purchase of your new
SLx Booster. SLx is renowned for producing
high quality electrical accessories and signal
distribution products. SLx Amplifiers benefit
from a number of features which assist with
high quality distribution of your TV/ Radio
Signal around your home such as:
• More efficient Switch-Mode Power Supply -
these run cooler saving energy whilst also
making them safer in your home
• Improved gain flatness delivering a better
balance across the performance range
• Lower noise figure for optimimum picture
and sound quality
• Greater signal handling capacity to cope
with more channels
• 5G and 4G Filtering – provides a typical
40dB protection from 5G and 4G mobile
phone signals reducing interference
• Coaxial connectors – simple to plug in to
standard aerial connections
Support: www.philex.com/products/technical-support/
We are sure you will enjoy using your SLx
amplifier, the amplifiers are easy to install and
fully automatic in operation, meaning that
no user adjustment is required and the low
running cost permits continuous operation.
If you have any queries please get in touch
with our technical department at
www.slxtechnology.com/support

Additional Features

Dual Inputs – With separate inputs for UHF TV
and VHF (FM and or DAB) Radio and a built-
in signal combiner your signal distribution
system can easily be expanded to include
high quality radio signals in every room.
If you have a long cable run from the aerial
to the booster you can use a masthead
pre-amp near the aerial which the Auto Line-
Power will detect and supply 12V to power it.
All SLx aerial boosters comply with RED
(The Radio Equipment Directive 2014/53/EU).
2
Inputs 5G & 4G
lter