Forecastle Breast Beam Assembly
(Photo 020) Assemble the belfry (134, 135, 209, 340, 541, 645, 662) as shown on Plan Sheet 4, 'Belfry assembly'. You will
notice the aft belfry support pillars are 1mm shorter than the fore, this is correct, do not level them. Line the forward edge of
the skid beam assembly with 1x3mm walnut. The belfry is positioned centrally across this lining, with the shorter (aft) pillar
supports placed directly onto the lining. Using (Fig 011) and Plan Sheet 4, 'Section through bulkhead 5' for reference the
forecastle breast beam supports (193) are also fitted along the lining. The forecastle breast beam (60 & 338) completes the
whole assembly. This assembly should be painted black.
Fig 011
©
22
2003 JoTiKa Ltd.