Audio Technica ATR100G Operation Manual page 7

ATR7000 Series VHF Wireless Systems Installation and Operation
RF Interference
Please note that wireless frequencies are shared with other radio services. According to Federal
Communications Commission regulations, "Wireless microphone operations are unprotected
from interference from other licensed operations within the band. If any interference is received
by any Government or non-Government operation, the wireless microphone must cease
operation... "
If you need assistance with operation, please contact your dealer or the Audio Solutions team at
Audio-Technica. Extensive wireless information is also available on the A-T Website at
www.audio-technica.com.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of
a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communication.
System Operating Frequencies
Application
• Traveling frequencies:
(Normally work anywhere in the U.S.A.
and Canada.)
Systems on these frequencies may be combined for up to three simultaneous
operating channels.
For future reference, please record your system information here (the serial
numbers appear near the screwdriver clip in each transmitter, and on the bottom
of each receiver):
Operating Frequency
Freq. Code
Receiver
Model ATR-R7000
Transmitter
Model ATR-T7100 or ATR-T7200
Freq. Code
T2
T3
T8
Frequency
Serial Number
Serial Number
english
Freq. (MHz)
169.505
170.245
171.905
• MHz
7