Summit X650 Series Switch Leds - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit Family Switches

Summit X650 Series Switch LEDs

Table 27 describes the LEDs on the Summit X650 series switches.
Table 27: LEDs on the Summit X650 Series Switches
Label or Type
Front Panel LEDs
MGMT
FAN
PSU-1
PSU-2
Stack 1 – 4
2-digit Stack number Indicator
Left digit (1)
Right digit (1 – 8)
Ethernet Ports
1 – 24
Management Port
Back Panel
Stacking Port LED (on
installed VIM1 module)
SFP/SFP+ port LED (on
installed VIM1 module)
96
Color/State
Blinking green
Blinking amber
Off
Steady green
Blinking amber
Off
Steady green
Blinking amber
Off
Steady green
Blinking amber
Off
Steady green
Blinking green
Upper half blinking
Lower half blinking
Lit steadily
Steady green
Blinking green
Steady green
Blinking green
Steady green
Blinking green
Steady green
Blinking green
Meaning
Normal operation
Power-on self test (POST) failed; diagnostic
test in progress.
No external power is attached.
Normal operation
Failure
No power
Normal operation
Failure
No power
Normal operation
Failure
No power
Link OK on the indicated stack port.
Activity on the indicated stack port.
Reserved for future use.
Indicates the position of this switch in the
SummitStack configuration.
This switch is the stack master node.
This switch is the stack backup node.
This switch is a standby node in the stack.
Link OK
Activity
Link OK
Activity
Link OK
Activity
Link OK
Activity
Summit Family Switches Hardware Installation Guide