Canon MB2300 series Online Manual page 1023

If the ink has already run out, we recommend that Do not print be selected for Received
documents in Auto print settings under FAX settings to store the received fax in the
machine's memory. After you replace the ink tank and select Print for Received
documents in Auto print settings, the fax stored in the machine's memory will be printed
automatically.
• Paper has run out:
Load the paper and tap OK on the touch screen.
• A different size of paper from that specified by Page size in FAX paper settings is loaded:
Load the same size of paper as that specified by Page size, then tap OK on the touch screen.
• You pressed the Stop button to cancel printing of a fax:
Press the HOME button and tap FAX to resume printing of the fax.
• Do not print is selected for Received documents in Auto print settings under FAX settings:
You can print the faxes stored in the machine's memory from the Memory reference screen in
the Fax menu.
Printing a Document in Machine's Memory
Note
• To print the received faxes automatically, select Print for Received documents in Auto print
settings under FAX settings.
Auto print settings
• If you did not print the fax stored in the machine's memory (e.g., if you did not resolve the
problem by pressing the Stop button), you can delete or print the fax stored in the machine's
memory later.
Document Stored in Machine's Memory
Busy/no • The recipient's number you dialed is busy.
signal
Try dialing again after waiting for a moment.
Resending Faxes (Redialing a Busy Number)
• The fax/telephone number dialed is incorrect.
Check the fax/telephone number and dial again.
• The recipient's fax machine did not respond (after all automatic redialing attempts).
Contact the recipient and have the recipient check the fax machine. For an overseas call, add
pauses to the registered number.
• The recipient is not using a G3 machine.
The machine cannot send or receive documents to/from a fax machine that is incompatible with
the G3 standard. Contact the recipient and ask the recipient to check whether the fax machine is
G3 compatible.
• The touch tone/rotary pulse setting on the machine is incorrect.
Set the machine to match the telephone line you are using.
Setting the Telephone Line Type
Memory is full. The machine's memory is full because it has sent/received too many documents, or a detailed
document.
Print the faxes stored in the machine's memory or save them on the USB flash drive, and delete
them from the machine's memory.
Auto print settings
1023