Multi-Function Meter Unit - Yamaha YZF-R1 Owner's Manual

Hide thumbs Also See for YZF-R1:
Table of Contents

Advertisement

Immobilizer system indicator light
The electrical circuit of the indicator
light can be checked by turning the key
to "ON". The indicator light should
come on for a few seconds, and then
go off.
If the indicator light does not come on
initially when the key is turned to "ON",
or if the indicator light remains on, have
a Yamaha dealer check the electrical
circuit.
When the key is turned to "OFF" and
30 seconds have passed, the indicator
light will start flashing indicating the im-
mobilizer system is enabled. After 24
hours have passed, the indicator light
will stop flashing, however the immobi-
lizer system is still enabled.
The self-diagnosis device also detects
problems in the immobilizer system
circuits. (See page 3-15 for an expla-
nation of the self-diagnosis device.)
INSTRUMENT AND CONTROL FUNCTIONS
EAU38625

Multi-function meter unit

3
2
1
11
1. "RESET" button
2. "SELECT" button
3. Tachometer
4. Shift timing indicator light
5. Traction control system mode display
6. Coolant temperature display/air intake tem-
perature display
7. Drive mode display
8. Speedometer
9. Odometer/tripmeter/fuel reserve tripme-
ter/instantaneous fuel consumption dis-
play/average fuel consumption display
10.Clock/stopwatch
11.Transmission gear display
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
settings while riding can distract the
EAU51814
operator and increase the risk of an
accident.
4
The
equipped with the following:
 a speedometer
5
6
 a tachometer
7
 an odometer
8
 two tripmeters (which show the
9
10
 a fuel reserve tripmeter (which
 a stopwatch
 a clock
 a coolant temperature display
 an air intake temperature display
 a transmission gear display
 a drive mode display (which
 a fuel consumption display (in-
EWA12423
 a traction control system mode
3-8
multi-function
meter
distance traveled since they were
last set to zero)
shows the distance traveled since
the fuel level warning light came
on)
shows the selected drive mode)
stantaneous and average con-
sumption functions)
display (which shows the selected
traction control system mode)
unit
is
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents