Replacing The License Plate Light Bulb - Yamaha YZF-R1 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
6
tighten the screw, otherwise the
lens may break.
Replacing the license plate
1
light bulb
1. Remove the license plate light unit
by removing the screws.
1. License plate light unit
2. Screw
2. Remove the license plate light
[ECA11192]
bulb socket (together with the
bulb) by pulling it out.
EAU24314
1
1. License plate light bulb
2. License plate light bulb socket
3. Remove the burnt-out bulb by
2
4. Insert a new bulb into the socket.
5. Install the socket (together with
6. Install the license plate light unit by
6-37
2
1
pulling it out.
the bulb) by pushing it in.
installing the screws.