BenQ Joybook R42 Series User Manual page 37

4. The memory cover is secured with 7 screws. Use a screwdriver to
remove these screws.
The screw labels indicate the screws' position to help you locate them
easily. Only remove these 7 screws on the memory cover, and retain
them in a safe place for later use.
5. Open the cover.
• Ground yourself to your Joybook with professional grounding
equipment like an anti-static wristband, or touch the metal surface on
the inside of your Joybook to discharge any static electricity.
• Handle the memory module by its edge and avoid touching the
contacts.
6. Align the memory module with the slot, and then insert it. When
inserting, pay attention to the direction of the memory module.
7. Gently push the free edge downwards until the module locks into
place.
If the memory module is not installed properly, your Joybook may not
boot properly.
Installing additional memory 33