NComputing N500 User Manual page 35

The N-series can make use of several DHCP tags and functions. This section will walk you through adding
the tags and functions appropriate for your deployment.
NOTE: This functionality requires N-series firmware version 1.4.1 or newer to be installed on all
devices that will be making use of automatic DHCP configuration.
1. From the Predefined Options and Values window, click the "Add" button.
2. Select and implement your chosen tags by filling out the Name, Data type, Code, and
Description fields as specified below. Note that the "STRING VALUE" is used later in step 5.
XenDesktop Tag 181
This tag will automatically link your N-series
device(s) with their designated XenDesktop
server(s).
NComputing CMF Tag 171
This tag will automatically link your N-series
Page 35 of 38
NComputing N-series User Manual rev10.08.13_1.5.0
Name XenDesktop*
Data Type String
Code 181
Description Default XenDesktop server
STRING VALUE (The IP, URL, or Fully Qualified
Domain Name of your
XenDesktop server.)
Notes *We recommend you use
"XenDesktop" plus the IP
address or URL of your
XenDesktop server to
differentiate this tag from any
future tags you might add.
Name VMC*