Toyota Camry Quick Reference Manual page 289

carownersmanual.net
carownersmanual.net
Hand−held
garage
transmitter
2. Place your hand−held garage transmit-
ter 25 to 75 mm (1 to 3 in.) away from
the surface of the HomeLink
Keep the indicator light on the HomeLink
in view while programming.
272
HomeLinkr
25 to
75 mm
(1 to 3 in.)
3. Simultaneously press
hand−held garage
R
. along with the selected HomeLink
ton.
R
Do not release the buttons until step 4
has been completed.
4. When the indicator
R
HomeLink changes from a slow to a
rapid flash after 20 seconds, you can
release both buttons.
'07Camry_U (L/O 0608)
and hold the 5. Test the operation of the HomeLink
transmitter button pressing the newly programmed button.
R
but- If programming a garage door opener,
check to see if the garage door opens
and closes.
If the garage door does not operate, iden-
tify if your garage transmitter is of the
light on the
"Rolling Code" type. Press and hold the
programmed HomeLink
rage door has the rolling code feature if
the indicator light (on the HomeLink
flashes rapidly and then remains lit after
2 seconds. If your garage transmitter is
the "Rolling Code" type, proceed to the
heading "Programming a rolling code sys-
tem".
2007MY CAMRY from Oct. '06 Prod. (OM33748U)
R
by
R
button. The ga-
R
)