Toyota Camry Quick Reference Manual page 271

carownersmanual.net
carownersmanual.net
Air flow selector button
Push the button to select the vents used
for air flow.
In automatic operation, you do not have
to select the air flow unless you desire
another air flow mode.
1. Panel—Air
instrument panel vents and the rear
vents.
2. Bi−level—Air flows from both the floor
vents, the instrument panel vents and
the rear vents.
3. Floor—Air flows mainly from the floor
vents.
254
4. Floor/Windshield—Air
from the floor vents and windshield
vents.
This position allows the air intake to
select FRESH automatically. This is to
clean up the front view more quickly.
If you want to return the setting to
RECIRCULATE mode, press the air in-
take selector button once again.
Press the "A/C" button for dehumidified
heating or cooling. This setting clears
the front view more quickly.
Windshield air flow button
When this button is pressed, air flows
mainly
turns on the defogging function with the
purpose of clearing the front view.
Pressing this button once again returns
the air flow mode to the last one used.
flows mainly from the
This button allows the air intake to select
FRESH automatically. This is to clean up
the front view more quickly. It is not pos-
sible to return to RECIRCULATE in this
mode.
Press the "A/C" button for dehumidified
heating or cooling. This setting clears the
front view more quickly.
'07Camry_U (L/O 0608)
flows mainly For details about air flow selector settings,
see
scribed below.
When any of the following conditions oc-
curs, the indicator light on the button may
flash and a motor sound may be heard.
This does not indicate a malfunction.
from the windshield vents and
2007MY CAMRY from Oct. '06 Prod. (OM33748U)
"—Air flow selector settings"
D
The ignition is set at ON after the bat-
tery is reconnected
D
Engine starting and stopping is re-
peated at short intervals
D
The engine is started with the low volt-
age battery
de-