Table of Contents
Advertisement
4.
Press
Siren chirps 1 time.
Warn-away Zone adjustment has now been entered.
Warn-away Zone can now be adjusted.
5.
Adjust Warn-away Zone
Press
Press
The sensor Warn-away zone can be tested at any time during adjust-
ment and will generate 1 siren chirp each time the zone is activated.
6.
Press
and lock in Warn Away zone setting.
Siren chirps 2 times
Primary zone can now be re-adjusted as described in step 3.
Or press
gramming mode.
The siren will chirp 3 times when sensor adjustment mode has been
exited.
Auto-Scroll for adjusting sensitivity - press and hold
els rapidly.
second unlock feature
ON: System will monitor disarm channel for 10 seconds after disarm, if disarm chan-
nel is again transmitted within 10 seconds, H2/12 Blue/white will generate the
programmed unlock output.
OFF: H2/12 Blue/white wire will generate the programmed unlock pulse at the same
time as first unlock.
© 2003 directed electronics, inc.
to adjust Warn-Away zone
to increase sensitivity.
to decrease sensitivity.
of the remote control to return to Primary zone adjustment
again to lock in primary zone setting and exit pro-
to increase or decrease sensitivity setting several lev-
or
51
Advertisement
Table of Contents
