Makita CL105D Instruction Manual page 7

2. There is no distinction between the
upper and lower sides of the dust bag.
You may insert its protrusion of any
side into the lower groove of the dust
stopper.
008932
3. Overlap the frame of dust stopper with
that of the dust bag.
014733
4. Place the dust stopper and the dust
bag together into the cleaner cavity in
the same direction of arrow on the
dust stopper. Insert them all the way
into the slots in the cleaner cavity.
1
014734
5. Place the entire cloth part of the dust
bag inside the tool itself.
1
014737
1. Lower groove
1
1. Cleaner cavity
1. Front cover
6. Close the front cover completely.
014735
Installing the paper pack
1. Unfold the entrance of the paper pack
before setting it on the dust stopper.
008928
1
2
008930
Use the dust stopper also when installing
dust pack. Be careful not to take the upper
side for the lower side by mistake because
they are different each other.
2. Insert the protrusion of the dust pack
into the groove in the dust stopper as
shown in the figure.
3
008931
3. There is no distinction between the
upper and lower sides of the dust pack.
7
1. Front cover
1
1. Upper side of
dust stopper
2. Lower side of
dust stopper
1. Dust stopper
1
2. Dust pack
3. Groove
2