Makita CL102D Quick Start Manual
Hide thumbs
Also See for CL102D:
- Instruction manual (68 pages) ,
- Instruction manual (57 pages) ,
- Instruction manual (53 pages)
Related Manuals for Makita CL102D
Summary of Contents for Makita CL102D
- Page 1 INSTRUCTION MANUAL Cordless Cleaner CL072D CL102D 011517 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model CL072D CL102D with a dust bag 0.50 L Capacity with a paper pack 0.33 L HIGH Approx. 8 min. Approx. 13 min. Continuous use Approx. 16 min. Approx. 21 min. Overall length 984 mm Net weight 1.0 kg... -
Page 3: Additional Safety Rules
16. Children should be supervised to ensure that If electrolyte gets into your eyes, rinse them they do not play with the appliance. out with clear water and seek medical attention right away. It may result in loss of SAVE THESE INSTRUCTIONS. your eyesight. -
Page 4: Functional Description
To switch off, press the "OFF" button. To change the 011525 cleaner speed, press the "HIGH/LOW" button. The first For Model CL102D press on this button is for high speed and the second press for low speed and then each press on this button 1. -
Page 5: Installing Dust Bag
ASSEMBLY 1. Dust stopper CAUTION: Always be sure that the tool is switched off and the • battery cartridge is removed before carrying out any work on the tool. Disposing of Dust 011536 CAUTION: Empty the cleaner before it becomes too full, or the •... - Page 6 because they are different each other. 1. Dust stopper 2. Groove 3. Dust bag 011529 Place the entire cloth part of the dust bag inside 008935 Insert the protrusion of the dust bag into the the tool itself. groove in the dust stopper as shown in the figure. 1.
-
Page 7: Operation
1. Dust stopper 2. Dust pack 3. Groove 008931 011529 Insert the protrusion of the dust pack into the Place the entire container part of the dust pack groove in the dust stopper as shown in the figure. inside the tool itself. Close the front cover completely. -
Page 8: Maintenance
Cleaning (Suction) MAINTENANCE Nozzle Attach the nozzle to clean off tables, desks, furniture, etc. CAUTION: Nozzle slips on easily. Always be sure that the tool is switched off before • attempting to perform inspection or maintenance. 1. Nozzle After use 011521 Nozzle + Extension wand (Straight pipe) The extension wand fits in between the nozzle and the... - Page 9 Press in the whole edge of the sponge filter against the recessed wall inside the dust bag/dust pack mounting area. CAUTION: After cleaning sponge filter, be sure to install it on • the cleaner. If washed in water, dry it up before installing.
- Page 10 Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Extension wand (Straight pipe) • Nozzle • Nozzle for carpet •...
- Page 12 Makita Corporation www.makita.com 884985-6...