Bradford White RTG 199HE Installation Instructions Manual page 5

▶ 3. Attach the gasket provided with the kit as shown in Fig.
6.
6720645551-15.1V
Fig. 6
▶ 4. Install supplied Freeze Prevention Kit (separate
packaging). Follow separate installation instructions
provided with Freeze Prevention.
Note: Freeze Prevention is not designed
to protect the appliance during long
durations below freezing or to protect
plumbing outside the appliance. Always
drain the water heater if it will be exposed
to long term freezing conditions.
▶ Position the outdoor vent cap on the top of the appliance,
as shown in Fig. 7.
Fig. 7
Outdoor kit – 6 720 811 755 (2014/05)
▶ Attach the outdoor vent cap to the appliance by fastening
the two provided screws and washers, see Fig. 8.
Fig. 8
NOTE: Once this kit is installed, the outdoor
vent cap will need to be removed, before
removing front cover.
Installing outdoor kit
5