Playing And Removing A Disc; Recording A Disc; Navigating Among Screens On The Windows 8.1 Operating System - Lenovo ThinkCentre M53 Hardware Maintenance Manual

Playing and removing a disc

To play a disc, do the following:
1. With the computer on, press the eject/close button on the front of the optical drive. The tray slides
out of the drive.
2. Insert a disc into the tray. Some optical drive has a snap hub in the center of the tray. If your drive has a
snap hub, support the tray with one hand and then push center of the disc until it snaps into place.
3. Press the eject/close button again or gently push the tray forward to close the tray. The disc player
program starts automatically. For more information, refer to the help system of the disc player program.
To remove a disc from the optical drive, do the following:
1. With the computer on, press the eject/close button on the front of the optical drive. The tray slides
out of the drive.
2. Carefully remove the disc from the tray.
3. Press the eject/close button again or gently push the tray forward to close the tray.
Note: If the tray does not slide out of the drive when you press the eject/close button, turn off your computer.
Then, insert a straightened paper clip into the emergency-eject hole adjacent to the eject/close button.
Use the emergency eject only in an emergency.

Recording a disc

If your computer is installed with a recordable optical drive, you can use the drive to record a disc.
To record a disc, do the following:
• On the Windows 7 operating system, use either the Corel DVD MovieFactory Lenovo Edition program or
the Power2Go program installed on your computer.
– To run the Corel DVD MovieFactory Lenovo Edition program, click Start ➙ All Programs ➙ Corel
DVD MovieFactory Lenovo Edition ➙ Corel DVD MovieFactory Lenovo Edition. Follow the
instructions on the screen.
– To run the Power2Go program, click Start ➙ All Programs ➙ PowerDVD Create ➙ Power2Go.
Follow the instructions on the screen.
• On the Windows 8.1 operating system, run the Power2Go program by doing the following:
1. On the Start screen, click the down arrow
type Power2Go in the search box in the top-right corner of the screen.
2. Click Power2Go in the search result to open the program.
3. Follow the instructions on the screen.

Navigating among screens on the Windows 8.1 operating system

To navigate among the desktop, the Start screen, and applications opened from the Start screen on the
Windows 8.1 operating system, do one of the following:
• From the Start screen, do one of the following to navigate to the most recently accessed workspace
(application, setting, or desktop):
– Using a pointing device: Move the pointer to the extreme bottom-left corner of the screen until the
Windows screen-control icon
– Using a touch screen: Swipe in and out on the left edge of the screen. Representations of all available
workspaces are displayed along the left edge of the screen. Tap the Windows screen-control icon
at the bottom.
in the bottom-left corner to go to the Apps screen. Then
is displayed; then click the icon.
.
Chapter 3 Using your computer
47