AFi SM10p Installation And Getting Started Manual page 41

FULL DUPLEX
GIGABIT ETHERNET
IEEE
IEEE 802.3
IEEE 802.3AB
IEEE 802.3U
IEEE 802.3X
IEEE 802.3Z
LAN SEGMENT
LED
LOCAL AREA
NETWORK (LAN)
MEDIA ACCESS
CONTROL (MAC)
MIB
MODAL
BANDWIDTH
NETWORK
DIAMETER
RJ-45 CONNECTOR
Transmission method that allows two network devices to
transmit and receive concurrently, effectively doubling the
.
bandwidth of that link
A 1000 Mbps network communication system based on
Ethernet and the CSMA/ CD access method.
Institute of Electrical and Electronic Engineers.
Defines carrier sense multiple access with collision detection
(CSMA/CD) access method and physical layer specifications.
Defines CSMA/CD access
specifications for 1000BASE-T
incorporated in IEEE 802.3-2005.)
Defines CSMA/CD access
specifications for 100BASE-
incorporated in IEEE 802.3-2005.)
Defines Ethernet frame start/stop requests and timers used for
flow control on full-duplex links. (Now incorporated in IEEE
802.3-2005.)
Defines CSMA/CD access
specifications for 1000BASE
incorporated in IEEE 802.3-2005.)
Separate LAN or collision domain.
Light emitting diode used for monitoring a device or network
condition.
A group of interconnected computer and support devices
.
A portion of the networking protocol that governs access to the
transmission medium, facilitating the exchange of data
between network nodes.
An acronym for Management Information Base. It is a set of
database objects that contains information about the device.
Bandwidth for multimode fiber is referred to as
bandwidth because it varies with the modal field (or core
diameter) of the fiber. Modal bandwidth is specified in units of
MHz per km, which indicates the amount of bandwidth
supported by the fiber for a one km distance.
Wire distance between two end stations in the same collision
domain.
A connector for twisted-pair wiring.
37
method and physical
Gigabit Ethernet.
method and physical
TX Fast Ethernet.
method and physical
Gigabit Ethernet.
layer
(Now
layer
(Now
layer
(Now
modal