PORT AND
SYSTEM STATUS
LEDS
Table 2: Port Status LEDs
LED
TP (Link/ACT)
TP SPEED
SFP (Link/ACT)
Table 3: System Status LED
SYSTEM LED
Power
POWER SUPPLY
SOCKET
Figure 3: Power Supply Socket
The SM10P switch includes a display panel for system and port
indications
that
troubleshooting. The LEDs, which are located on the front panel
for easy viewing. Details are shown below and described in
the following tables.
Condition
Green
Green
Green/Amber
Condition
Green
OFF
There are a power sockets on the rear panel of the switch. For
normal
power
socket for AC power cord.
simplify
installation
Status
Lit Green when TP link good
Blinks when any traffic is present
Lit Green when TP link on 1000Mbps
Blinks Green when TP link on 100 Mbps
Off when TP link on 10Mbps
Lit Green when SFP link on 1000Mbps speed
Lit Amber when SFP link on 100Mbps speed
Blinks when any traffic is present
Status
Lit when power is coming up
supply,
the
SM10P
AC Power socket
5
and
network
has
standard
power