TO Rack-mount Devices:
Step1.
Attach the brackets to the device using the screws provided in the Mounting
Accessory.
Figure 9: Attaching the Brackets
Step2.
Mount the device in the rack (Via Optional Rack-Mount kit), using four
rack-mounting screws (not provided). Be sure to secure the lower rack-
mounting screws first to prevent the brackets being bent by the weight of the
switch.
Figure 10: Installing the switch in a Rack
Step3.
If installing a single switch only, turn to "Connection to a Power Source" at the
end of this chapter.
Step4.
If installing multiple switches, mount them in the rack, one below the other, in
any order.
Circuit Overloading: Be sure that the supply circuit to the
rack assembly is not overloaded.
Grounding: Rack-mounted equipment should be properly
grounded.
11