NEC UNIVERGE Aspire UX Basic Operation Manual page 40

Turning Off a Lamp That Is On or Flashing
If the lamp of the Feature or Large lamp is on or flashing, you can turn the lamp off as follows.
Feature lamp
„ When the lamp goes on in red
Function or status assigned
The Feature key was pressed immediately before the
lamp turned on.
„ When the lamp is flashing green
Function or status assigned
An intercom call is held.
Large lamp
„ When the lamp is flashing
Function or status assigned
When the lamp flashes green
The message waiting function is active.
When the lamp flashes green at long intervals
A new message is recorded in the mail box for voice
mail.
(When the voice mail option is being used)
If you cannot find the cause
If you cannot turn a lamp off with the method listed above, or if you have any other questions, contact your distributor.
38
How to turn off the lamp
Press .
How to turn off the lamp
How to turn off the lamp
Do either of the following:
• Answer the message.
9 0 9
• Ask the person who set the message waiting function
to cancel it.
9 1 1
Listen to the message.
Extension
number