Covert Code Black 3G Instruction Manual page 33

triggered by the PIR. If you already set the
Sensitivity to OFF, then the camera will only take
photos when the Time-Lapse option is on. If you
have the PIR set to L(<10℉) , N(10-80℉), or
H(>80℉), the camera will also take photos when the
PIR is triggered. To turn the Time-Lapse option on,
use the ◄ and ► buttons to choose a time option.
5-60 seconds (in 5 second increments) ,2-60
minutes and 2-8 hours. Once you have chosen the
time option you want, press OK to save the setting.
The camera will continuously take photos in timed
increments you set. Remember, this will generate a
lot of photos and you may want to limit the number
of photos sent via MMS daily.
START-STOP: If you only want your camera to be
on during part of the day each day you can set the
Start-Stop function. The Code Black has a dual
start-stop option. Press the ▲ and ▼ buttons to
highlight the Start-Stop option. The default setting