NANO PLASMA purification operation(Optional)
NANO PLASMA Air Purifying Operation only
1
Press the Start/Stop button.
The unit will respond with a
beep.
2
Open the door of the remote
controller. Press the NANO PLASMA
button.
Operation will start when the button
is pressed and stop when the button
is pressed again.
Set the fan speed again with the door of the remote
3
controller closed. You can select the fan speed in four
steps-low, medium, high or CHAOS.
Each time the button is pressed, the fan
speed mode is shifted.
Air purifying operation (NANO PLASMA) can be
with cooling, Heating or any other operations.
If you press the only NANO PLASMA button,
only NANO PLASMA purification function
operates.
Then, fan speed is low. You can select the fan
speed in four steps-low, medium, high or
CHAOS.
Each time the button (
speed mode is shifted.
Operating Instructions
) is pressed, the fan
Owner's Manual 21