BMW Mountain Bike Enduro Owner's Manual page 51

After mounting the wheel and tightening the quick-release pull the brake
(a)
lever and spin the wheel. The rotor should not drag on the brake
caliper or on the brake pads.
Before riding again check that you have not let any grease or
other lubricants get on the brake surfaces
mounting the wheel.
Check whether the brake pads hit the rotors or braking surfaces of the
rims. Make sure the wheel is properly seated and firmly fixed in the drop-
outs. Always do a brake test as described in chapter "Before every
Ride"!
a
(b)
or rotor while
b
47