Gateway 450 User Manual page 269

Component
Ethernet jack
Power connector
S/PDIF digital audio jack
Headphone jack
Line in jack
Icon Description
Plug a 10/100 Ethernet network cable into this jack. For
more information, see "Connecting to a wired Ethernet
network" on page 36 and "Networking Your Computer"
on page 187.
Plug the AC adapter cable into this connector.
Important: If your port replicator has a power connector
on the left side (see "Left" on page 257), plug the
Gateway 450ROG AC adapter into that connector. If your
port replicator does not have a power connector on the
left side, plug the Gateway 450ROG AC adapter into this
connector.
Plug an optical (Toslink) AC-3 digital audio cable into this
jack.
Plug amplified speakers or headphones into this jack.
The built-in speakers on the notebook are turned off
when speakers or headphones are plugged into this jack.
This jack is turned off when headphones are plugged into
the notebook's headphone jack.
Connect an external audio input source (such as a
stereo) to this jack so you can record sound on your
computer or play sound through the notebook speakers.
www.gateway.com
Back
259