Calibration; Optical Calibration - Masterwork Automodules Tech NC-3000 Series Operation Manual

Calibration

The sensors can be easily calibrated to ensure best performance:
Turn the unit off and on again.

While the initializing indicator is running, press the keys "Cur" and "Start"

together and hold until the display showing calibration menu.
Select the desired submenu.

a. Optical – to calibrate the IR sensors.
b. Motor –to calibrate the motor speed.

Optical calibration


Install the calibration paper (white slip) supplied with this manual and press

F3
NC-3000 Series calibrates the sensors automatically.

The display shows the result accordingly,

Any number of sensors = Repeat calibration
OK = Calibration done
Repeat step 2~3, until the display shows "OK",

After complete the calibration of white slip, install the black slip and repeat

the step 2~3 until the display shows "OK",
Once you completed the calibration, just turn the unit off, NC-3000 Series

runs in normal mode the next time you turn it on.
Optical Calibration Failure
Motor Calibration

Calibration Menu
On the process of calibration
Optical Calibration Success
Maintaining NC-3000 25