Selecting Currency / Detection Off Mode; Auto / Manual Start Mode; Add Mode - Masterwork Automodules Tech NC-3000 Series Operation Manual

Selecting Currency / Detection Off Mode

To Select one of the factory preset currencies or turn off the detection:
Press the Function key CUR (Currency).

The available currencies and detection off mode show sequentially at the

left top of the LCD.
Keep pressing the Function key CUR until the desired currency or detection

off mode is shown.
Currency and Value icons show when detection is on, and disappear when it
is off.
When detection is off, only the "Quantity" shows, the "Amount " and " List

"will be disabled.
Currency Selection

Auto / Manual Start Mode

To set the start-counting mode to automatic and manual mode.
Press the key Function and Auto (6) to switch between Auto/Manual Start

Mode.
The LCD will show the actual status of the mode.

On A (Auto Start Mode), the device counts after detecting banknotes on

the hopper.
On M (Manual Start Mode), the device counts after pressing the Start.

Auto Mode

Add mode

To sum up the counting result.
Press the key Function and Add (5) to toggle between Add On/Off Mode.

10 Masterwork Automodules Tech Corp Ltd
Detection Off mode
Manual Mode