Set The Currency Exchange Rates; Advanced Setting - Masterwork Automodules Tech NC-3000 Series Operation Manual

Set the Currency Exchange Rates



Advanced Setting


Highlight the icon. press the "

Highlight the desired currency by the navigation

keys " (Move Up)", "
Press " (Enter) " to set the rate.

The currency exchange table can be set up to six

digits and one decimal separator dot.
Use the navigation key to add, move to next

digit, or place the dot; press "C" to delete the last
digit.
After setting the desired exchange rate, press "

Enter / Start " to confirm and go back to the upper
layer.
Highlight the icon and

Select the desired submenu

a. Switch on mode - to toggle between the factory
default and the last setting start up mode.
b. Key Beep - confirm beep when pressing buttons.
On / Off (default is ON)
Turn key sound on or off.

Use the "

setting.
Confirm setting.

" (Enter)"or "Start"
press the
setting
(Move Down)".
"
press the
" and " " to toggle a desired
(Enter)"
(Enter)"
to confirm the
19