Switched On Mode; Printer Paper; Printer Port - Masterwork Automodules Tech NC-3000 Series Operation Manual

Switch On mode

To toggle between the factory default and the last setting start up mode.
Print Paper

To setup a papel size of the connected thermal printer.
20 Masterwork Automodules Tech Corp Ltd
Highlight the icon Switch On Mode.

Confirm Selection with

Use the " " and " " to toggle a desired setting.

Default: Settings: set to the factory defalut

settings
Detection - On. Add - On. Batch - Off. (Count
mode.) Auto - On.
Turn off Status: keep the last settings for the

next restart.
Confirm setting.

Press the

go back to upper layer.
Highlight the icon Print Paper.

Confirm Selection with

Check the paper size of the connected thermal

printer.
W57.5: 2 inches paper.

W78.5: 3 inches paper.

Select the paper size of the connected thermal

printer.
Use the "

setting
Confirm setting.

Press the

to upper layer.
"
the
(Enter) to confirm setting and
(Default: W(79.5))
"
the
" and " " to toggle a desired
to confirm setting and go back
(Enter)"
.
(Enter)"
..