Table of Contents
Advertisement
9-1-3. Screw locking agent TB1401
Apply screw locking agent TB1401 to all hex. socket hd. bolts M5 and M6. (As the hex. socket hd. bolts for M8
that secure the front cover ass'y and the hex. socket hd. bolts (w/flange) for M8 that secure the cylinder case are
special bolts, they cannot be re-used if removed. Use fresh service parts only.)
Caution: If bolts are loosened by vibration, it could cause damage to the hammer body. Ensure without
fail that screw locking agent is applied to threaded portions prior to reassembly.
9-1-4. Tightening torque
(1) Hex. socket hd. bolts M5
(2) Attached bolts of handle
(Hex. socket hd. bolts M5 x 12)
(3) Hex. socket hd. bolts M6
(4) Tapping screws D4
(5) Tapping screws D5
(6) Attached bolts of front cover ass'y
(Hex. socket hd. bolts M8 x 25)
(7) Attached bolts of cylinder case
(Hex. socket hd. bolts (W/flange) M8 x 35)
9-1-5. Internal wiring
Wiring diagram
(1) For products with nosie suppressor
Stator
Connector
Armature
Stator
+1.96
+20
7.84
N
m (80
kgf
•
0
0
+20
4.94
+1.96
N
m (50
kgf
•
0
0
+1.96
+20
9.80
N
m (100
kgf
•
0
0
19.6
0.49 N
m (20
5 kgf
•
2.94
0.49 N
m (30
5 kgf
•
39.2
0.98 N
m (400 10 kgf
•
+1.96
+20
19.6
N
m (200
kgf
•
0
0
SW
Connector
Noise
suppressor
Pillar terminal
Fig. 13
--- 14 ---
+17.4
cm, 69.4
in-Ibs.)
•
0
+17.4
cm, 43.4
in-Ibs.)
•
0
+17.4
cm, 86.8
in-Ibs.)
•
0
cm, 17.4
4.3 in-Ibs.)
•
cm, 26.0
4.3 in-Ibs.)
•
cm, 347.2
8.7 in-Ibs.)
•
+17.4
cm, 173.6
in-Ibs.)
•
0
Brown
Plug
Blue
Advertisement
Table of Contents
