Table of Contents
Advertisement
Ratings
Some discs are recorded with ratings according
to age. You can set up your home theater to
play only discs with an age rating lower than
your child's age.
1
SETUP.
Press
2
Select [Preference Setup], and then press
OK.
3
Select [Parental], and then press OK.
4
Select an age rating, and then press OK.
•
To play all discs irrespective of the
rating, select level 8.
5
Use the Numeric buttons to enter the
password.
Lock disc
To restrict access to discs that are not encoded
with ratings and parental control, lock the disc
manually. You can lock upto 20 discs on your
home theater.
1
While playing a disc, press
2
Select [General Setup], and then press
OK.
3
Select [Disc Lock] > [Lock], and then
press OK.
» A message prompts you to enter the
password.
4
Enter the password with the Numeric
buttons.
» The disc is locked.
•
To play the locked disc, enter the
password.
Energy saving
Save energy by changing the following settings.
SETUP.
Auto standby
When playing a disc or a USB storage device,
automatically switch your home theater to
standby if:
•
it is in pause or stop mode, and
•
no button is pressed for 30 minutes.
1
SETUP.
Press
2
Select [General Setup], and then press
OK.
3
Select [Auto Standby] > [On], and then
press OK.
Sleep timer
Set timers to switch the home theater to
standby after a specified time.
1
Press
SETUP.
2
Select [General Setup], and then press
OK.
3
Select [Sleep Timer], and then press OK.
4
Select the duration of the sleep timer.
» The sleep timer can be set up to
60 minutes. If the sleep timer is set to
[Off], it switches off.
5
Press OK to activate.
» The home theater switches to standby
after the specified time.
Screen saver
Automatically switch your home theater to
screen saver mode if:
•
it is in pause or stop mode, and
•
no button is pressed for 10 minutes.
1
SETUP.
Press
2
Select [General Setup], and then press
OK.
3
Select [Screen Saver] > [On], and then
press OK.
EN
19
Advertisement
Table of Contents
