Download  Print this page

Advertisement

Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Question?
Contact
Contact
Philips
Philips
User manual
HTD3510
HTD3540
HTD3570

Advertisement

Table of Contents

   Summary of Contents for Philips HTD3510

  • Page 1 Always there to help you Register your product and get support at www.philips.com/welcome Question? Question? Contact Contact HTD3510 Philips Philips HTD3540 HTD3570 User manual...
  • Page 3: Table Of Contents

    Contents 7 Product specifications 1 Important Safety Care for your product 8 Troubleshooting Care of the environment 9 Notice 2 Your home theater Copyright Main unit Trademarks Remote control Connectors 10 Language code 3 Connect and set up Connect speakers Connect to TV Connect audio from TV and other devices Set up speakers...
  • Page 4: Important

    1 Important wall mount to a wall that can support the combined weight of the product and the wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper Read and understand all instructions before you wall mounting that results in accident, use your home theater.
  • Page 5: Care For Your Product

    Keep out of reach of children and Please visit www.recycle.philips.com for contact the manufacturer. additional information on a recycling center in your area. This is CLASS II apparatus with double insulation, and no protective earth provided.
  • Page 6: Your Home Theater

    Load Pause theater Mute Congratulations on your purchase, and Remote control welcome to Philips! To fully benefit from the support that Philips offers, register your home This section includes an overview of the theater at www.philips.com/welcome. remote control. Main unit...
  • Page 7: Connectors

    (Standby-On) k SURR • Switch the home theater on or to Select surround sound or stereo sound. standby. (Play/Pause) • When EasyLink is enabled, press Start, pause or resume play. and hold for at least three seconds to switch all connected HDMI CEC (Stop) compliant devices to standby.
  • Page 8: Video Out

    b MIC Audio input from a microphone. c AUDIO IN Audio input from an MP3 player (3.5mm jack). Back connectors a AC MAINS Connect the supplied AC power cable. b SPEAKERS Connect to the supplied speakers and subwoofer. c VIDEO OUT Connect to the composite video input on the TV.
  • Page 9: Connect And Set Up

    3 Connect and set FRONT FRONT FRONT WOOFER LEFT RIGHT CENTER This section helps you connect your home theater to a TV and other devices, and then set it up. For information about the basic connections of your home theater and accessories, see the quick start guide.
  • Page 10: Connect To Tv

    Place the rear surround speakers to the • HDMI-CEC is a feature that enables left and right side of your seating position, CEC compliant devices that are either in line with it or slightly behind it. connected through HDMI to be controlled by a single remote control, SUBWOOFER (subwoofer): such as volume control for both the...
  • Page 11: Connect Audio From Tv And Other Devices

    TV and the home theater. (see 'Set When you watch videos, switch your TV to up EasyLink (HDMI-CEC control)' on the correct video input. For details, see the page 10) TV user manual. If you cannot hear the TV audio through your home theater, set up the audio Connect audio from TV and manually.
  • Page 12: Set Up Speakers

    For information on your device, see connectors on your home theater to the the user manual of the device. • Philips does not guarantee 100% interoperability with AUDIO OUT connectors on the TV or all HDMI-CEC devices. other device.
  • Page 13 Select [Video], and then press OK. EasyLink controls Select [HDMI Setup] > [EasyLink Setup] With EasyLink, you can control your home > [Sys Audio Control] > [On]. theater, TV, and other connected HDMI-CEC • To play the audio from the TV compliant devices with a single remote control.
  • Page 14: Use Your Home Theater

    4 Use your home Play buttons theater Button Action Navigation Navigate menus. buttons This section helps you use the home theater to Confirm an entry. play media from a wide range of sources. (Play/ Start, pause or resume play. Before you start Pause) •...
  • Page 15: Data Files

    Note Note • • Picture and sound can be synchronized through the Make sure that the subtitle file has the exact same setup menu, press (Home), select [Setup] > [Audio] name as the video file. For example, if the video file is >...
  • Page 16: Usb Storage Devices

    Press the Navigation buttons buttons and USB storage devices OK to select and change: • [Info]: Display the play information. Enjoy pictures, audio, and video stored on a [PBC]: Enable or disable the content • USB storage device such as an MP4 player. menu navigation of VCD and SVCD What you need discs with Play Back Control feature.
  • Page 17: Radio

    Musical slideshow Play buttons Button Action If the picture and audio files are from the same disc or USB storage device, you can create a Select a preset radio station. musical slideshow. Alphanumeric Select an audio track and then press OK. buttons Press BACK and then go to the picture...
  • Page 18: Karaoke

    [Karaoke Idol]: Have a Karaoke Using the 3.5mm stereo audio cable, • connect the MP3 player to the AUDIO IN contest with your friends. Follow the connector on your home theater. on-screen instructions to start the • If you use 6.5mm stereo audio cable, contest.
  • Page 19 [Stereo]: Two-channel stereo sound. • Ideal for listening to music. Note • If the audio source is a 2.1 channel. multi-channel mode will output 5-channel stereo sound.
  • Page 20: Change Settings

    5 Change settings Note • If your preferred disc language is not available, select [Others] from the list, and enter the 4-digit language code found at the end of this user manual (see The home theater settings are already 'Language code' on page 27). configured for optimal performance.
  • Page 21: Audio Settings

    Lock disc Audio settings Press (Home). Press (Home). Select [Setup] and then press OK. Select [Setup] and then press OK. Select [General] and then press OK. Select [Audio] and then press OK. [Disc Lock]: Lock the disc to restrict • [HDMI Audio]: Set the HDMI audio •...
  • Page 22: Restore Default Settings

    Restore default settings Press (Home). Select [Setup] and then press OK. Select [Preferences] > [Default], and then press OK. Follow the onscreen message to restore default setting. » Your home theater is reset to its default settings, except for password, parental control and disc lock settings.
  • Page 23: Update Software

    • Do not install a lower version of software than the Disconnect the USB flash drive from your current version installed on your product. Philips is not computer. liable for problems caused due to software downgrade. Step 2: Update the software...
  • Page 24: Product Specifications

    7 Product • Video: .avi, .divx, .mpg, .mpeg, • Picture: .jpg, .jpeg specifications Amplifier • Total output power: 300W RMS (30% THD) • Frequency response: 20 Hz-20 kHz / Note ±3 dB • Specifications and design are subject to change without •...
  • Page 25: Remote Control Batteries

    • File system: FAT16, FAT32, NTFS range • USB port: 5V , 500mA • Dimensions (WxHxD): HTD3510: 85 x 88 x 83 mm (front/ • rear) Main unit HTD3540: 85 x 159 x 80 mm (front); • • Power supply: 240 x 1006 x 240 mm (rear) •...
  • Page 26: Troubleshooting

    20), and then switch it off and switch If you still have a problem, get support at www. on again. philips.com/support. On your home theater, press SOURCE • repeatedly to select the correct audio Main unit input.
  • Page 27 The operation is not possible. EasyLink does not work. • Make sure that the home theater is connected to a Philips brand EasyLink TV, and the EasyLink option is turned on (see 'Set up EasyLink (HDMI-CEC control)' on page 10).
  • Page 28: Notice

    9 Notice registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. This section contains the legal and trademark notices. The terms HDMI and HDMI High-Definition Copyright Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI...
  • Page 29: Language Code

    10 Language code Inupiaq 7375 Pushto 8083 Abkhazian 6566 Afar 6565 Irish 7165 Russian 8285 Afrikaans 6570 Íslenska 7383 Quechua 8185 Amharic 6577 Italiano 7384 Raeto-Romance 8277 Arabic 6582 Ivrit 7269 Romanian 8279 Armenian 7289 Japanese 7465 Rundi 8278 Assamese 6583 Javanese 7486...
  • Page 30 11 Index language language code amplifier audio main unit predefined modes overview specifications specifications audio options troubleshooting media formats care connector product connectors front connectors control options disc play picture overview main unit main unit remote control discs audio options picture control buttons options...
  • Page 31 safety use of the product sound predefined sound mode surround sound synchronize picture and sound troubleshooting sound mode speakers specifications surround sound subwoofer specifications synchronize picture and sound time search titles trademarks troubleshooting connection main unit picture play sound tuning grid format USB storage device options...
  • Page 32 Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. HTD3510/3540/3570_98_UM_V1.0...

This manual is also suitable for:

Htd3540Htd3570

Comments to this Manuals

Symbols: 0
Latest comments: