Table of Contents
Advertisement
Audio settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Audio], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
•
[Night mode]: For quiet listening,
decrease the volume of loud sounds on
your home theater. Night mode is only
available for Dolby-encoded DVD and
Blu-ray discs.
•
[HDMI Audio]: Set the HDMI audio
output from your TV, or disable HDMI
audio output from the TV.
Parental control settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
•
[Change Password]: Set or change your
password for parental control access.
If you do not have a password or have
forgotten your password, enter 0000.
•
[Parental control]: Restrict access to
discs that are recorded with age ratings.
To play all discs, irrespective of the ratings,
select 8 or [Off].
EN
26
Display settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
•
[Auto subtitle shift]: Enable or disable
automatic repositioning of subtitles on
TVs that support this feature.
•
[Display panel]: Set the brightness of the
home theater front panel display.
•
[VCD PBC]: Enable or disable the
content menu navigation of VCD and
SVCD discs with Play Back Control
feature.
Energy saving settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
•
[Screen saver]: Switch the home theater
to screen saver mode after 10 minutes
of inactivity.
•
[Auto standby]: Switch the home theater
to standby after 30 minutes of inactivity.
This timer works only when a disc or
USB play is paused or stopped.
•
[Sleep timer]: Set the duration of the
sleep timer so that the home theater is
switched to standby after the specified
period.
Advertisement
Table of Contents
