Enabling The Usb Port In Windows; Wireless Troubleshooting; Printing A Network Setup Page - Lexmark Z2400 Series User Manual

5
Select your operating system.
6
Select the file that you want to download, and then follow the directions on the computer screen.

Enabling the USB port in Windows

To confirm that the USB port is enabled on the computer:
1
Do one of the following:
In Windows Vista
a
Click Control Panel.
b
Click System and Maintenance
c
Click Device Manager.
In Windows XP
a
Click Start.
b
Click Control Panel
c
From the Hardware tab, click Device Manager.
In Windows 2000
a
Click Start.
b
Click Settings
c
From the Hardware tab, click Device Manager.
2
Click the plus sign (+) beside Universal Serial Bus Controller.
If USB Host Controller and USB Root Hub are listed, then the USB port is enabled.
For more information, see the computer documentation.

Wireless troubleshooting

Printing a network setup page

A network setup page lists the configuration settings of your printer, including the IP address and MAC address of the
printer.
1
Make sure the printer is turned on.
2
Press .
The light pulses.
3
Open the access cover.
4
Press and hold .
5
While holding , press
6
When the light becomes steady, release
The network setup page prints.
System.
Performance and Maintenance
Control Panel System.
.
System.
.
58