Connecting The System - Yamaha RX-E600 Owner's Manual

Connecting RX-E600 and DVD-E600
1
Connect ‰ to ‰ using the Audio pin cable.
Insert the plugs into the jacks of the same color.
2
Connect RX-E600 and DVD-E600 with the system control cable.
The other SYSTEM CONNECTOR of DVD-E600 is for connecting MDX-E300 or KX-E300.
3
Connect the AC power plug of DVD-E600 to AC OUTLET of RX-E600.
This connection allows you to control the power of the system through one-touch operation. It also reduces the standby
power consumption of DVD-E600.
1
Audio pin cable
3
To RX-E600
Adding KX-E300 and MDX-E300 to the above system
(For details, refer to the owner's manual supplied with the respective component.)
1
Connect Å and ı of RX-E600 to Å and ı of KX-E300.
2
Connect Ç and Î of RX-E600 to Ç and Î of MDX-E300.
3
Connect an external component to the AUX terminal of RX-E600.
4
Connect DIGITAL OPTICAL OUT of DVD-E600 to DIGITAL OPTICAL IN of MDX-E300.
Take off the covers of the optical fiber cable plug, the DIGITAL OPTICAL OUT jack, and the DIGITAL OPTICAL
IN jack before making digital connections. Be sure to replace the terminal's cover when the terminal on the rear panel
is not being used, in order to protect from dust.
Caution
• Never turn RX-E600 on until all connections between components have been completed.
• Never connect or disconnect the system control cable and/or power cord while the system components are turned on.
0104CRXE400(M).03-08.E

Connecting the system

C
IN
MD
DVD SYSTEM
OUT
CONNECTOR
FM ANT
D
75Ω UNBAL.
A R L
IN GND
TAPE
OUT
AM
ANT
B
E
IN
DVD
IN
6Ω MIN./SPEAKER
AUX
R L TUNER SPEAKERS
System control cable
MAIN
COMPONENT VIDEO OUT
P
R
S VIDEO
5
GETTING STARTED
+
–
SUBWOOFER SYSTEM
CONNECTOR
OUT
2
SYSTEM
CONNECTOR
RECEIVER
AV
P Y
B
DIGITAL AUDIO
OUT OUT
VIDEO OUT
L
VIDEO
R
COAXIAL OPTICAL
E
2004.06.15, 19:07
<RX-E600>
To wall outlet
<DVD-E600>
5